News Article

UVC LEDs To Fight Coronaviruses


CORSA project will develop special UVC LEDs to inactivate SARS-CoV-2 and further respiratory viruses on surfaces and skin

A newly launched three-year collaborative project called CORSA, will be developing special UVC LEDs to inactivate SARS-CoV-2 and further respiratory viruses on surfaces and skin. The project team will be investigating parameters such as wavelengths, irradiation doses and virus habitats. The German Federal Ministry of Education and Research is supporting the project from 2021 with a total of three million euros.

Like bacteria and fungi, viruses can be inactivated by UVC light. However, for the current coronavirus SARS-CoV-2, no reliable data on the optimal wavelengths and irradiation doses have been available to date. The CORSA project (Inactivation of SARS-CoV-2 by UVC light and tolerability for humans), hopes to address this.

The competencies of the nine project partners cover the complete value chain up to commercial use. The partners are further developing UVC LED technologies and performing comprehensive tests to ensure that the irradiation is as effective as it is safe for humans. UVC LEDs in the wavelength range around 270 nm provide the basis for irradiating non-living surfaces, especially in air filters.

LEDs with emissions around 233 nm are to be used directly on humans. In order to test the effectiveness of UVC radiation in aerosols and on human and animal skin, the Ferdinand-Braun-Institut (FBH) is developing suitable LEDs and irradiation systems in cooperation with the Technische Universität Berlin (TU Berlin), UVphotonics NT GmbH and Osram Opto Semiconductors GmbH.

In the long term, UVC LEDs, filters and ventilation technology, among others, are to be combined in a way that will reduce restrictions on economic and social life in the event of pandemics, especially in enclosed spaces. UVC LEDs offer many advantages: They are small, can be precisely adjusted to the optimum wavelength and are non-toxic, unlike conventional mercury vapour lamps.

270 nm UVC LEDs - to eliminate viruses on non-living surfaces and in aerosols

270 nm LEDs, which Osram Opto Semiconductors is currently working on, will be used for non-living surfaces that are not suited for chemical disinfection, as well as for aerosols. In particular, the project partners are testing how to eliminate the coronavirus in ventilation systems when the circulated air or filters are irradiated. In the process, the optimal irradiation doses and times that effectively inactivate the virus will be determined.

The project thus also provides fundamental insights into how UVC radiation can be used to effectively fight SARS-CoV-2 and other respiratory viruses such as influenza viruses. The Institute for Animal Hygiene and Environmental Health at Freie Universität Berlin is testing the effect on coronaviruses in aerosols, and TU Berlin is testing disinfection in air handling systems.

233 nm UVC LEDs - eliminating viruses directly on humans or in their immediate vicinity

UVC LEDs with emission wavelengths around 233 nm cause little damage to human skin. This makes them attractive for antisepsis as well as for disinfection of busy indoor areas, for example in schools, theatres or operating rooms. Such LEDs are currently not commercially available. However, FBH and TU Berlin have been researching and developing UVC LEDs for several years as part of their Joint Lab GaN Optoelectronics and are worldwide leading in light emitting diodes in this wavelength range.

Building on their expertise in semiconductor technologies, they are collaborating with UVphotonics to further increase the output power, conversion efficiency and lifetime of the LEDs. Unlike longer-wavelength UVC radiation - from mercury vapor lamps, for example - the light emitted by these LEDs penetrates only a few micrometers into the skin and thus barely reaches the deeper, living cells. It is therefore expected that the skin can compensate for possible minor damage with its natural repair mechanisms.

To ensure that the technology is safe for humans, the Department of Dermatology at Charité - Universitätsmedizin Berlin is conducting in vivo tests to determine the effect of UVC radiation on skin. Data on the virucidal effect are coming from the Friedrich-Loeffler-Institut and the Universitätsmedizin Greifswald.

Using existing know-how

Charité and Universitätsmedizin Greifswald can rely on their experience from the VIMRE project. Since mid-2020, they have been testing 233 nm wavelength irradiation systems developed by FBH to inactivate multidrug-resistant pathogens in hospitals, such as MRSA, on the body surface. The technology basis of the UV LEDs was created as part of the 'Advanced UV for Life' consortium and jointly developed by TU Berlin and FBH. FBH also has extensive experience in prototyping UV LED irradiation systems, designed and constructed according to specific requirements. Only recently, an irradiation system with 265 nm UV LEDs was completed in cooperation with the FBH spin-off UVphotonics. 128 of these LEDs disinfect everyday objects such as mobile phones or masks on a UV-transparent pane from above and below. In less than ten minutes, the system reaches a UV dose of 500 mJ/cm2, as recommended, for example, by the Centers for Disease Control and Prevention (US Department of Health & Human Services).

CS International to return to Brussels – bigger and better than ever!

The leading global compound semiconductor conference and exhibition will once again bring together key players from across the value chain for two-days of strategic technical sessions, dynamic talks and unrivalled networking opportunities.

Join us face-to-face on 9-10 November 2021

  • View the agenda.
  • 3 for the price of 1. Register your place and gain complementary access to TWO FURTHER industry leading conferences: PIC International and SSI International.
  • Email  or call +44 (0)24 7671 8970 for more details.

*90% of exhibition space has gone - book your booth before it’s too late!


Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
Live Event