+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
*/
News Article

Osram red LED smashes the 200 lm/W barrier

The firm says the results of this project can be extended to all the wavelengths in the aluminium indium gallium phosphide (AlInGaP) range to boost efficiency.

A red high-power LED has set a new efficiency record in an Osram Opto Semiconductors R&D lab with an electro-optical efficiency of 61%.

The 1 mm2 chip housed on a laboratory package emits at a wavelength of 609 nm (λ-dom) and has achieved a record value of 201 lm/W at an operating current of 40 mA. At a typical operating current of 350 mA its luminous efficacy is still an impressive 168 lm/W, which means that even at this high wattage more than half of the electrical energy is converted into light.



World record in the Osram laboratory: 201lm/W – 61% efficiency (WPE)

LED colour mixing systems such as the Osram Brilliant Mix concept are the latest trend, particularly for general illumination applications. These systems enable any kind of white light to be produced, from Warm White through Neutral White to Daylight White. The overall performance of the system is as good as the individual components will allow.

Osram’s says its new red high-power LED promises a further improvement in the quality of light with lower power consumption, especially in Warm White. This will benefit not only colour mixing concepts but also all applications that use high-efficiency red LEDs – in the general illumination, projection and automotive sectors.

Higher efficiency means more light from the same amount of electricity, which in turn means lower power consumption for a particular application. Because fewer chips are needed to produce the same brightness level, designers will have greater freedom. The light sources can be made smaller while still producing the same brightness.

Martin Behringer from the LED development team at Osram Opto said, “The results of this project can be extended to all the wavelengths in InGaAlP chip technology so we anticipate a boost in efficiency in these light colours – even at 660 nm which is the wavelength needed for plant lighting for example. Probably we will be introducing the results of this development project across the entire wavelength spectrum into production in about a year’s time.”

The enormous increase in output was achieved by a chip with the latest generation of the company’s own thin-film technology.
Connecting the Compound Semiconductor Industry

The 13th CS International conference builds on the strengths of its predecessors, with around 40 leaders from industry and academia delivering presentations that fall within five key themes: Ultrafast Communication; Making Headway with the MicroLED; Taking the Power from Silicon, New Vectors for the VCSEL, and Ultra-wide Bandgap Devices.

Delegates attending these sessions will gain insight into device technology, find out about the current status and the roadmap for the compound semiconductor industry, and discover the latest advances in tools and processes that will drive up fab yields and throughputs.

To discover our sponsorship and exhibition opportunities, contact us at:

Email: info@csinternational.net
Phone: +44 (0)24 7671 8970

To register your place as a delegate, visit: https://csinternational.net/register

Register
×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: