+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Loading...
News Article

Roth & Rau slashes the cost of solar cell production

Achieving 50 to 70 percent savings in silver, the process is developed for front and rear side coating with nickel. A tool is now available for the production of high efficiency heterojunction cells
Meyer Burger Technology has announced that its Group member Roth & Rau AG has developed a process which uses inexpensive nickel in busbar metallisation for the electrical contacting of solar cells.

The coating process includes both the front and rear sides of the cell within a production tool. Meyer Burger says this process, which is immediately available, significantly differentiates Roth & Rau from its competitors.

Depending on the contact technology, a saving of between 50 and 70 percent in expensive silver can be achieved and therefore significantly reduce the production cost of solar cells. A further benefit from the process is the fact that nickel is a readily available material. This means that solar cell manufacturers are not tied to specific suppliers as is the case with other materials.

The HELiA system, which was developed primarily for the production of high efficiency heterojunction cells, coats the solar cells with nickel in a shortened system configuration to form the front and rear busbars. This is achieved by means of a sputtering process. In contrast to other systems, the HELiA system permits simultaneous processing not only of the rear surface but also of the front surface on which there is a significantly greater potential for savings.

 A further decisive benefit of this new process is the outstanding adhesion of the cell connectors to the front and rear surfaces of the solar cell as a result of the nickel metallisation in standard soldering processes.

The metallisation of the fingers can thus take place regardless of the electrical characteristics of the busbar and be optimised to match them. In this way, the metallisation of the fingers is de-coupled from the solderability of the busbar, thereby enabling the use of new pastes and metallisation processes that do not currently achieve reliable solderability. The performance of solar cells coated with this process is comparable with that of solar cells metallised in the conventional way by screen printing.

The concept and associated system will be presented at the Meyer Burger stand (Hall 3, E2) at the upcoming EUPVSEC trade fair in Frankfurt from 25th to 28th September.

×
Search the news archive

To close this popup you can press escape or click the close icon.
×
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • View all news
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: