+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
News Article

Record-breaking Antireflection Coating On Solar Cells

A new development could significantly improve the performance of solar cells, LEDs and photodetectors
A team of researchers from Rensselaer Polytechnic Institute (RPI), Magnolia Solar, Inc. and Pohang University of Science and Technology have demonstrated a novel antireflection (AR) coating.

It beats the widely employed double-layer AR (DLAR) coating on state-of-the-art triple-junction solar cells.

The scientists demonstrated that the solar cells investigated gain over 4 percent in efficiency when replacing the industry-standard DLAR with an optimised four-layer AR coating.



Considering that the solar spectrum is an intrinsically broadband spectrum, such broadband characteristics of the AR coating are undoubtedly beneficial for high power conversion efficiency.

What's more, omnidirectional AR characteristics have become important for the rapidly expanding terrestrial application of solar cells. This is because solar irradiance in terrestrial applications usually has a large range of incident angles for non-tracking solar cells.

Both broadband and omnidirectional AR characteristics are attainable by four-layer AR coatings, as demonstrated by the RPI-led team.

RPI says that the excellent broadband and omnidirectional AR characteristics of the four-layer AR coating are achieved through solving the problem of refractive index matching at multiple layer interfaces.

By using tailored and low-refractive index nanoporous silica layers, the team has greatly reduced the refractive index contrast at the semiconductor / AR coating / air interfaces.

Through a multilayer design methodology powered by a genetic algorithm optimisation, favourable antireflective properties over a specified wavelength range and angle-of-incidence range were found.

Two porous layers of the four-layer AR coating were fabricated by oblique-angle deposition of silica thereby resulting in films with refractive indices of 1.32 and 1.11. This is less than the refractive index of silica. The other two layers are dense and were fabricated by co-deposition of silica / titania using sputtering.

According to the photocurrent measurements performed by the team, the angle-of-incidence (0°- 80°) averaged photocurrent enhancement (over an uncoated triple-junction solar cell) of the four-layer AR coating amounts to 34.4 percent. The enhancement of a DLAR coating is only 25.3 percent.

In the future, the team members Jaehee Cho and E. Fred Schubert, will integrate this novel AR coating technology on surface-textured devices.

They will also investigate innovative fabrication methods for depositing low-refractive index AR coatings on curved surfaces, such as a hemispherical lens.

Further details of this research are described in the paper, “Enhanced Omnidirectional Photovoltaic Performance of Solar Cells Using Multiple-Discrete-Layer Tailored - and Low-Refractive Index Anti-Reflection Coatings," by X. Yan et al in Advanced Functional Materials, 23, 583 (2013).

CS International to return to Brussels – bigger and better than ever!


The leading global compound semiconductor conference and exhibition will once again bring together key players from across the value chain for two-days of strategic technical sessions, dynamic talks and unrivalled networking opportunities.


Join us face-to-face between 28th – 29th June 2022

  • View the agenda.
  • 3 for the price of 1. Register your place and gain complementary access to TWO FURTHER industry leading conferences: PIC International and SSI International.
  • Email info@csinternational.net  or call +44 (0)24 7671 8970 for more details.

*90% of exhibition space has gone - book your booth before it’s too late!

Register


×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: