+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
*/
News Article

Osram's LED lives longer at high temperatures

The III-nitride based LED works with a new conversion technology allowing much thinner converter layers which better dissipate the heat
Excessive heat generation is one of the main reasons why LEDs fail. With the Oslon Square, Osram Opto Semiconductors is presenting an LED that withstands high ambient temperatures particularly well.



The Oslon Square LED (shown above) is ideal for interior lighting

To ensure that the colours of several LEDs in a luminaire remain uniform even at higher temperatures, they are measured and binned at 85°C, a temperature that comes very close to that encountered in lighting applications within buildings, in everything from spotlights to retrofit light sources.

Osram has optimised the heat dissipation of the Oslon Square to allow an increase in the junction temperature.

“With our new conversion technology, we can produce significantly thinner converter layers. The thinner layers better dissipate the heat, thus enabling the higher temperatures in the LED,” says Ivar Tangring, SSL Product Development at Osram Opto Semiconductors, explaining the advantages of the innovative technology.

With that, the Oslon Square can reach a lifetime of considerably more than 50,000 hours even at high temperatures of up to 135° C in the LED.

Customers benefit from the properties of the new Oslon Square Measuring and binning at operating temperatures of 85° C is of great significance to customers who further process the LEDs into luminaires. They receive precise information on parameters such as luminous flux or colour stability, which they need to optimally define the properties of their products.

Furthermore, the improved temperature behaviour leads to higher luminous efficacy in the application.

“This luminous efficacy, meaning the ratio of luminous flux to applied electrical power, helps our customers to significantly optimise the price/performance ratio of their luminaire solutions,” Tangring emphasises.

Thanks to the higher permitted junction temperatures, fewer large heat sinks are required, and this simplifies the design of lamps and luminaires, because they can be smaller and therefore less costly.

Application in interior lighting

The 3 mm x 3 mm Oslon Square is particularly suitable for the various applications in buildings. At 85° C, it has a colour temperature ranging between 2,400 and 5,000 Kelvin, and can generate teither warm- or cold-white light. The LED has a beam angle of 120° and the typical voltage at 700 mA varies between 2.9 V and 3.2 V. The device has a maximum current of 1.8 A and a thermal resistance Rth of 3 K/W. These were previously 1.5 A and 3.8 K/W respectively..                          

The colour rendering index is over 80 and the luminous flux at 700 mA is an impressive 202 lumens at 3,000K.

Product variations with a different colour temperature spectrum and higher colour rendering indices are to follow.

At present, the new LED is undergoing extensive quality testing: The certification process under the LM-80 long lifetime standard is underway. The results of the 3,000 hour test are expected at the end of the year, those of the 6,000 hour test in spring 2014.



The new Oslon Square: Better heat dissipation, stable colour uniformity and a longer lamp life even at high temperatures



Connecting the Compound Semiconductor Industry

The 13th CS International conference builds on the strengths of its predecessors, with around 40 leaders from industry and academia delivering presentations that fall within five key themes: Ultrafast Communication; Making Headway with the MicroLED; Taking the Power from Silicon, New Vectors for the VCSEL, and Ultra-wide Bandgap Devices.

Delegates attending these sessions will gain insight into device technology, find out about the current status and the roadmap for the compound semiconductor industry, and discover the latest advances in tools and processes that will drive up fab yields and throughputs.

To discover our sponsorship and exhibition opportunities, contact us at:

Email: info@csinternational.net
Phone: +44 (0)24 7671 8970

To register your place as a delegate, visit: https://csinternational.net/register

Register
×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: