Loading...
News Article

Osram's compact LEDs conquer compact spotlights

The firm says its latest III-nitride based CoB LEDs offer twice the light from half the surface
For the first time, Osram is offering a chip-on-board LED.

The Soleriq P 9 is suitable for compact powerful spotlights like the ones used in retail outlets and museums.

The latest member of the Osram Soleriq family produces 2000 lumen from a surface with a diameter of nine millimetres. Compared with the existing Soleriq S 13, that is twice as much light from an area half the size. This high brightness is made possible by the surface-emitting chips used.



The Soleriq P 9

Osram says just one of the new LEDs is enough to replace a 35 W HID lamp for spotlighting.

The P 9 has a light emitting surface of 64 mm² and produces 2000 lm and has a luminous efficacy of 100 lm/W (at a temperature of 85°C and 3000 K).

Even at very high packing densities they can produce high luminous flux with above-average efficiency. The small light-emitting surface means that extremely compact and therefore lightweight optics can be fitted for highly compact spotlights.

The spotlights can therefore be less cumbersome and more cost-effective, while still providing the same luminous intensity.



The Soleriq P 9 has been designed for use in spotlights for directional indoor lighting and in particular for shop and museum lighting

“The Soleriq P 9 is just the start of a series of LEDs with enormous brightness and efficiency, generated from a light-emitting surface of only a few millimetres in diameter. Over the next few months we will be unveiling more products in the Soleriq P family, taking the benefits of the P series into different form factors and areas of application,”explains Andreas Vogler, responsible for the P 9 in the SSL division at Osram Opto Semiconductors.

The new Soleriq is being tested and measured at a temperature of 85°C to simulate the thermal conditions in actual applications as closely as possible. Customers will therefore be able to directly plan the use of the LED in their applications and will not have to carry out time-consuming appraisals based on data sheet values.

The P 9 is the first member of the new Soleriq P series; following the existing E and S series. All Soleriq versions are CoB LEDs (Chip-on-Board) and offer a high brightness. They are ideal for indoor spotlight applications and are easy to install. The Osram partner network “LED Light for you” offers accessories such as holders, optics and drivers tailored to the Soleriq families.

 

×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: