Info
Info

FBH Shows Custom Lasers And UV LEDs At Photonics West

News

Applications of the flexible and compact light sources include LiDAR, medicine, and (Raman) spectroscopy

The Ferdinand-Braun-Institut (FBH) will present novel developments and advancements of its diode lasers and UV light-emitting diodes (LEDs) at Photonics West 2019, San Francisco (USA) from February 5-7, 2019.

At the German Pavilion, the institute will show its full range of capabilities, from design through chips to modules and prototype systems. With 20 scientific contributions, FBH is also noticeably represented at the accompanying conferences (2-7 February). One focus of FBH's R&D is on high-power diode lasers used, e.g., in materials processing both directly and as pump sources. Among others, FBH's Director Günther Tränkle is giving an overview in his plenary presentation on recent design improvements that are boosting efficiency, peak power, brilliance, and range of emission spectra.

Stand-alone PC-controlled pulse laser sources

The FBH offers flexible laser sources delivering 200 ps to 20 ns pulses, allowing all systems to be flexibly assembled with diode lasers of further wavelengths and power ranges. For automotive LiDAR systems, for example, wavelength-stabilised laser diodes have been developed emitting 5 ns pulses with 40 W pulse power near 905 nm with good beam quality and up to 85°C. 3-emitter laser chips, whose emission can easily be optically combined into one single spot, yield up to 100 W. Chips can be delivered with FBH driver or as stand-alone PC-controlled laser source.

Another versatile and particularly sophisticated system is the efficient all-in-one pulse laser system PLS. It combines in-house developed optical and electronic semiconductor components, delivering ultra-short light pulses from 5 - 15 ps. It provides any desired repetition rate from the hertz to the MHz range; pulse peak performance reaches > 20 W output power.

Miniaturized fibre-coupled diode laser sources

The FBH has developed compact laser modules emitting watt-level power in the yellow spectral range, wavelengths from 532 nm to 590 nm. Based on a single package sized only 76 x 54 x 15 mm³, each solution is designed to ideally serve the specific application. They are available in both CW and pulsed operation for photo-coagulation treatments in ophthalmology or use in fluorescence spectroscopy and STED microscopy, respectively. The modules introduced here feature an all-semiconductor master-oscillator power-amplifier (MOPA) combined with frequency doubled (PPLN) crystals and provide polarisation-maintaining fiber output options. Due to these new laser modules, the size of laser systems for medical applications will significantly shrink, from rack size to the dimensions of a shoe box.

Portable SERDS - from chips to applications

For rapid SERDS (Shifted Excitation Raman Difference Spectroscopy) measurements, FBH has demonstrated monolithic dual-wavelength diode lasers emitting light alternately on two slightly different wavelengths around 785 nm and also around 671 nm. These Y-branch DBR diode lasers with electrically controlled micro-heaters implemented above the gratings provide dual-wavelength laser emission and wavelength tuning over several nanometers - simply by changing the heater current. The sources enable fast alternating operation between both laser emission lines, thus investigations with reduced exposure times down to the millisecond range. Supplemented with battery power supply, electronic measurement equipment and a software interface, the systems can be used for in situ measurements. In-house developed, portable systems have already been successfully used for measurements on food, soil, plants, and human skin.



CS International 26-27 March 2019, Sheraton Airport Hotel, Brussels

In its ninth year, CS International will continue to provide timely, comprehensive coverage of every important sector within the compound semiconductor industry. Presentations are split into 5 key themes and each industry key theme will be delivered by a keynote presentation from a leading industry figure as well as a market analyst presentation tailored to the theme. Together, the talks will detail breakthroughs in device technology; offer insights into the current status and the evolution of compound semiconductor devices; and provide details of advances in tools and processes that will help to drive up fab yields and throughputs. Attendees at the two-day conference will gain an up-to-date overview of the status of the CS industry, and have opportunities to meet many other key players within this community.

Places will be limited, so register your place today: https://cs-international.net

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info