Info
Info
News Article

Fulfilling The Rising Demand For High Purity Hydrogen

Purified hydrogen is an essential ingredient in the MOCVD processes used to manufacture LEDs, power devices and photovoltaics.Moves toward larger reactors and bigger wafers are increasing the demand for more and more ultra-pure hydrogen from increasingly reliable, compact sources. Fulfilling this need is a novel palladium technology developed by Power and Energy, says the company’s Stuart Bestrom






 



 


 




Sales of MOCVD tools have exploded over the last twenty years, leading to a vast increase in the number of chips produced by this technique. But the approach for purifying the hydrogen gas that supports this form of epitaxial growth – a palladium membrane purification technology – has stood still.

This lack of progress on the hydrogen front is a significant concern for LED chipmakers, who continue to migrate to more complex and demanding processes involving ever-larger chambers and ever-bigger wafers. Sensitivity to oxygen and carbon contamination goes up and up, hydrogen flow rates have recently tripled for the largest MOCVD reactors, and flow changes during the process recipe runs can surge from 0 to 300 standard litres per minute (slpm) with no transition period. The traditional palladium purifiers were never designed to handle these new process recipes and they have a number of inherent limitations in durability, quality and cost. This has prompted some users, particularly those in large fabs in China and Taiwan that are particularly keen to cut costs and work with higher flow rates, to consider alternative purification technologies.

These chipmakers are finding a solution to their needs in a palladium membrane technology developed by Power and Energy of Ivyland, PA, in cooperation with the US Department of Defense (DoD). The DoD pursued this development to serve its needs for pure hydrogen to power fuel cells (see box “Hydrogen fuel cells"), but the results of the project have proven successful in semiconductor applications as well.

The resulting palladium membrane technology that we have developed at P+E is the most significant innovation in gas purification in over 20 years. One of the biggest breakthroughs is a doubling-to-trebling of capacity per purifier compared to traditional palladium purifiers. This larger capacity means that a new LED fab requiring 12,000 (slpm) of hydrogen to support 50 MOCVD reactors needs only three of our gas cabinetsized purifiers. If traditional purifiers were used, six would be needed, and each would have a much bigger footprint.

Reducing size also has additional benefits, because it cuts power consumption and other facility costs. What’s more, the micro-channel palladium membrane technology at the heart of this new system has been proven to greatly improve durability: It provides uninterrupted purification for years of continuous operation. These advancements eliminate contamination, yield loss and downtime caused by hydrogen purity variability in compressed, cryogenic and generator sources.


 





 


Working with hydrogen


 



It is only possible to fully appreciate the benefits of our palladium technology after understanding how a conventional hydrogen purifier works, and the demands that are placed upon it. Conventional hydrogen purifiers have been widely used where hydrogen of the highest purity has been demanded, in order to yield MOCVDgrown wafers and crystal ingots of the highest possible material quality.

These conventional purifiers draw on palladium’s unique properties to act as a catalyst (see Figure 1). Hydrogen gas molecules dissociate into atoms upon contacting the surface of the palladium membrane that is held, along with all the other parts of the purifier, at 400 °C. At this temperature, hydrogen atoms are small enough to readily diffuse through the membrane, driven by differential hydrogen pressure across the interface.


 





 




No other material is small enough to diffuse through palladium, so impurities such as water, oxygen, nitrogen, carbon dioxide, carbon monoxide, hydrocarbons and rare gases remain on the inlet side of the membrane. The solid barrier provided by palladium results in no breakthroughs. This contrasts with catalysts and getters, which rely on chemical reactions on reactive surface areas under controlled conditions. Palladium technology also offers the unique ability to remove high-ppm levels of impurities from a cylinder source gas without detriment to purifier lifetime or outlet H2 purity (see Figure 2). Other methods of hydrogen purification, such as regenerable catalysts and heated zirconium getters, are intended for removal of low ppm impurities, and the purifier lifetime is directly dependent on the incoming impurity and flow rate. This robust capability makes palladium purifiers ideal for compressed cylinder and generator sources where the gas quality can vary significantly from day-to-day. Hydrogen can be supplied as either a compressed gas, a liquefied (cryogenic) gas or it can be generated on site. The purity of gas varies widely, depending on the source and specific region. Liquid hydrogen is usually the most pure form of this gas, and it is typically between six and seven ‘nines’ purity – in other words, total impurities are 1,000-100 ppb.

However, liquid hydrogen is not available in Taiwan, Korea and China, the three countries where most new high-volume LED and photovoltaic fabs are located. In these fast-growing regions, fabs must rely on compressed and generator sources, which can include a great deal of variability in the purity of compressed and locally generated hydrogen. Typical sources are water, natural gas or propane, and costs associated with generating hydrogen in this manner are high, due to substantial power requirements.

Chipmakers that use high-purity hydrogen must have a contingency plan that can be brought into action when the primary source is unavailable due to maintenance or unforeseen downtime. One option is to use an industrial or chemical plant in these emergencies, but that means a compromise in gas purity. For example, a facility with onsite storage of 99.999 percent hydrogen may be forced to use 99.99 percent backup hydrogen on rare occasions. Purification systems have to be designed to deal with these contingencies, so that the final gas purity is unaffected by changes in the quality of the sources. Palladium purifiers can ensure that all impurities are removed from the hydrogen, whether typically present or the result of an unusual event.


 





 


Innovative membranes


 



Through the support of a series of Navy, Army and DARPA research contracts over a period of eight years, we have developed hydrogen purifiers based on a unique micro-channel palladium-alloy membrane configuration. This technology is commercially available and highly reliable, thanks to automated membrane test and inspection methods and advanced manufacturing technologies.

Our unique membrane structure is based on an ‘insideout’ design. It features a ‘micro-channel’, in which the hydrogen enters the inside of the membrane tube (see Figure 3). This palladium tube has an inner ‘return tube’ that is inside and concentric with the membrane. With this design, hydrogen diffuses out into a passivated stainless steel chamber while a small volume of hydrogen continuously sweeps all impurities to a bleed line. Thanks to improvements in weld and brazing methods, quality inspection, and membrane assembly design, our micro-channel architecture can deliver a dramatic increase in durability compared to conventional designs. Stress on the membrane is reduced, eliminating the need for a supporting spring. In addition, hydrogen recovery is enhanced with the micro-channel.


 





This enables efficient recovery, even with low concentrations of hydrogen from reformed fuel streams. We have been working with our vendors to improve the alloy and tube drawing processes. These efforts, which reduce impurities and physical defects, have yielded a more uniform alloy with fewer micro-defects. The upshot is more reliable membranes.

The durability and lifetime of our palladium-based hydrogen purifier has been improved through more stringent quality control that pre-emptively screens out material defects. To realise this, we have developed a proprietary membrane inspection station for identifying and eliminating substandard membranes at the earliest possible stage. Each membrane is tested under extreme conditions, before being individually subjected to a helium leak-test prior to acceptance into inventory. With our configuration, the palladium membrane tubes undergo an advanced, computer-controlled vacuum braze process. This ensures precise, repeatable brazing of each membrane. The membrane assembly is then laser welded into an electropolished and passivated stainless steel manifold.

Using this design allows axial and radial expansion and contraction without restriction, reducing stress on the membrane tubes. Each membrane is held in an array that prevents it from ever contacting its neighbours. In contrast, traditional palladium purifiers allow membranes to move freely against each other, thereby contributing to long-term stress of the tubes. Preventing membranes from coming into contact also leads to a free flow of gas and prevents tube damage.

To demonstrate the practical benefits of our palladium technology, we have developed automated, accelerated-life-testing systems to replicate extreme operating conditions. Membranes were pressure- and temperature-cycled to simulate the stresses possible from long-term operation. The goal was to confirm a minimum cycle lifetime of 10,000 – equivalent to 10 years with 3 on/off cycles per day. This benchmark, which is well above typical operating conditions, is always met with membranes that pass incoming inspection (see Figure 4). In fact, some membranes that failed inspection still show excellent lifetimes. This means that our inspection methods may eliminate ‘good’ membranes. However, they ensure that no accepted membranes fail the cycle test.


 





 




We subjected our sample membranes to thermal cycling to validate flow performance and stability over time. The result: Confirmation of the effectiveness of our membrane test methods to identify and remove membranes with micro-defects prior to assembly. Encouragingly, our test also showed that the new microchannel membranes provide improved durability under the most hostile operating conditions. Our 9000MZ and 9000MS high-flow purification systems are now incorporating the new membrane. These purification systems have been manufactured with production and quality procedures that ensure a consistent operating environment with stable operation for many years. The compact array of membranes provides a high flow capacity in a very compact package. A single vessel measuring 6" x 24" that previously purified up to 200 slpm can now flow 600 slpm. The compact package also reduces power consumption, and in addition it allows savings in required floor space and HVAC sizing, important considerations for the larger semiconductor fabrication facilities in Asia.

Through analysis of raw materials, assembled systems and resulting outlet gas purity, it has been possible to improve the quality of the hydrogen supply so that impurities are consistently below 0.1 ppb (100 ppt). This exceptional level of purity predominantly stems from proprietary manufacturing processing for preparing and passivating stainless steel, which have reduced sources of carbon and moisture that can contribute impurities downstream of the palladium membranes. Thanks to this advance, we can now guarantee a start-up purity of less than 100 ppt for all impurities. In comparison, typical specifications from traditional palladium purifiers offer impurities of less than 1 ppb, and this is only assured after a lengthy start-up purging at a minimum 20 percent of rated flow.

Benefits associated with our micro-channel technology are by no means limited to LED chipmakers: They are also a great assistance to producers of photovoltaics, polysilicon devices and fuel cells. Improvements in the performance of all these devices are eagerly anticipated, and our hydrogen-purifying technology should help to unlock that promise throughout the remainder of this decade.


 





AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.

REGISTER FOR FREE

VIEW SESSIONS

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification}
Live Event