News Article

Infineon Introduces Millimetre Wave SiGe Transceivers

The wireless single-chip ICs simplify the design of small cell backhaul links
Infineon Technologies AG has introduced a new transceiver family that simplifies system design and production logistics by replacing more than 10 discrete devices.

Due to their low power consumption the single-chip high-integration transceivers also help to reduce fixed expenses in high data rate millimetre wave wireless backhaul communication systems. The new transceivers address the market for wireless data links with data rates of more than 1 Gigabit per second (Gbps) between LTE/4G base stations and core networks.

Devices in the Infineon BGTx0 product family come in a standard plastic package and replace more than 10 discrete devices used in current system designs with one single chip. The customers’ assembly process is simplified dramatically as they can continue to use astandard SMT assembly flow.

The BGTx0 family provides a complete radio frequency (RF) front-end for wireless communication in 57-64 GHz, 71-76 GHz, or 81-86 GHz millimetre wave bands. Paired with a baseband/modem, the system solution requires less space, offers improved reliability and lower cost for the critical wireless backhaul links needed in mobile base stations that support LTE/4G networks.

“The V- and E-band microwave frequencies available for LTE/4G backhaul support data rates three times higher than in earlier generation networks. Correspondingly they need superior RF performance to meet operating requirements," says Philipp von Schierstaedt, Vice President and General Manager of the Business Line RF & Protection Devices at Infineon Technologies.

“With this new transceiver family, Infineon leverages its process technology and RF design leadership to help system designers reduce complexity, simplify their production logistics, and ultimately improve quality and field reliability of their backhaul connectivity solutions."

The BGTx0 transceivers integrate all of the RF building blocks – I/Q modulator, Voltage Controlled Oscillator (VCO), Power Amplifier (PA), Low Noise Amplifier (LNA), Programmable Gain Amplifier (PGA), SPI control interface and more – on a single chip in a compact, plastic eWLB package (embedded Wafer Level Ball Grid Array). Validation and calibration of RF performance occurs in production using Built-In-Self-Test (BIST), which contributes to the simplicity of integrating the chip into a device builder’s production flow.


The SiGe technology enables deliverable output power of up to 18 dBm of PA, a low noise figure of 6 dB of LNA and excellent VCO phase noise better than -85dBc/Hz at 100kHz offset allows a system designer to implement high modulation schemes up to QAM64 with a sample rate of 500 Msamples/sec and QAM32 with 1Gsamples/sec at a 10 -6 BER (Bit Error Rate).

ESD (Electrostatic Discharge) performance of more than 1KVolt increases the robustness and eases the system design for customers. The low power consumption of less than 2 W for this Backhaul transceiver family also allows network operators to reduce related fixed expenses.

Due to the direct conversion architecture of the transceiver, the interface between RF and baseband is simplified significantly compared to currently available discrete millimeter wave systems.

System suppliers also benefit from the quality and reliability of Infineon’s automotive qualified production flow for SiGe ICs.

Engineering samples of the BTGx0 family will be available in September 2013, with production ramp planned for late this year..

AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.



Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
Live Event