News Article

Flat Lens Makes It All The Better To See You With

A novel new lens could lead to improved photolithography, nanoscale manipulation and manufacturing and high-resolution 3D imaging
For the first time, scientists working at the National Institute of Standards and Technology (NIST) say they have demonstrated a new type of lens.

It bends and focuses ultraviolet (UV) light in such an unusual way that it can create ghostly, 3D images of objects that float in free space.

The easy-to-build lens could lead to improved photolithography, nanoscale manipulation and manufacturing, and even high-resolution three-dimensional imaging, as well as a number of as-yet-unimagined applications in a diverse range of fields.

The ultraviolet (UV) metamaterial formed of alternating nanolayers of silver (green) and titanium dioxide (blue). The metamaterial has an angle-independent negative refractive index, enabling it to act as a flat lens. When illuminated with UV light (purple) a sample object of any shape placed on the flat slab of metamaterial is projected as a three-dimensional image in free space on the other side of the slab.

Right image: Here a ring-shaped opening in an opaque sheet on the left of the slab is replicated in light on the right.

Left image: SEM micrograph of a ring-shaped opening in a chromium sheet located on the surface of a flat slab of metamaterial. Bottom right: Optical micrograph of the image projected beyond the slab under UV illumination, demonstrating that the metamaterial slab acts as a flat lens. (Credit: Lezec/NIST)

"Conventional lenses only capture two dimensions of a three-dimensional object," says one of the paper's co-authors, NIST's Ting Xu. "Our flat lens is able to project three-dimensional images of three-dimensional objects that correspond one-to-one with the imaged object."

An article published in the journal Nature explains that the new lens is formed from a flat slab of metamaterial with special characteristics that cause light to flow backward - a counterintuitive situation in which waves and energy travel in opposite directions, creating a negative refractive index.

Naturally occurring materials such as air or water have a positive refractive index. You can see this when you put a straw into a glass of water and look at it from the side. The straw appears bent and broken as a result of the change in index of refraction between air, which has an index of 1, and water, which has an index of about 1.33. Because the refractive indices are both positive, the portion of the straw immersed in the water appears bent forward with respect to the portion in air.

The negative refractive index of metamaterials causes light entering or exiting the material to bend in a direction opposite to what would occur in almost all other materials. For instance, if we looked at our straw placed in a glass filled with a negative-index material, the immersed portion would appear to bend backwards, completely unlike the way we're used to light behaving.

In 1967, Russian physicist Victor Veselago described how a material with both negative electric permittivity and negative magnetic permeability would have a negative index of refraction.

Permittivity is a measure of a material's response to an applied electric field, while permeability is a measure of the material's response to an applied magnetic field.

Veselago reasoned that a material with a refractive index of -1 could be used to make a lens that is flat, as opposed to traditional refractive lenses, which are curved. A flat lens with a refractive index of -1 could be used to directly image three-dimensional objects, projecting a three-dimensional replica into free space.

A negative-index flat lens like this has also been predicted to enable the transfer of image details substantially smaller than the wavelength of light and create higher-resolution images than are possible with lenses made of positive-index materials such as glass.

It took over 30 years from Veselago's prediction for scientists to create a negative-index material in the form of metamaterials, which are engineered on a subwave-length scale. For the past decade, scientists have made metamaterials that work at microwave, infrared and visible wavelengths by fabricating repeating metallic patterns on flat substrates.

However, the smaller the wavelength of light scientists want to manipulate, the smaller these features need to be, which makes fabricating the structures an increasingly difficult task. Until now, making metamaterials that work in the UV has been impossible because it required making structures with features as small as 10 nanometers, or 10 billionths of a metre.

What's more, because of limitations inherent in their design, metamaterials of this type designed for infrared and visible wavelengths have, so far, been shown to impart a negative index of refraction to light that is traveling only in a certain direction. This makes them hard to use for imaging and other applications that rely on refracted light.

To overcome these problems, researchers working at NIST took inspiration from a theoretical metamaterial design recently proposed by a group at the FOM Institute for Atomic and Molecular Physics in Holland. They adapted the design to work in the UV- a frequency range of particular technological interest.

According to co-authors Xu, Amit Agrawal and Henri Lezec, aside from achieving record-short wavelengths, their metamaterial lens is inherently easy to fabricate. It doesn't rely on nanoscale patterns, but instead is a simple sandwich of alternating nanometre-thick layers of silver and titanium dioxide, the construction of which is routine.

And because its unique design consists of a stack of strongly coupled waveguides sustaining backward waves, the metamaterial exhibits a negative index of refraction to incoming light regardless of its angle of travel.

The researchers say this realisation of a Veselago flat lens operating in the UV is the first such demonstration of a flat lens at any frequency beyond the microwave. By using other combinations of materials, it may be possible to make similarly layered metamaterials for use in other parts of the spectrum, including the visible and the infrared.

The metamaterial flat lens achieves its refractive action over a distance of about two wavelengths of UV light, about half a millionth of a metre - a focal length challenging to achieve with conventional refractive optics such as glass lenses.

What's more, transmission through the metamaterial can be turned on and off using higher frequency light as a switch, allowing the flat lens to also act as a shutter with no moving parts.  

"Our lens will offer other researchers greater flexibility for manipulating UV light at small length scales," says Lezec. "With its high photon energies, UV light has a myriad of applications, including photochemistry, fluorescence microscopy and semiconductor manufacturing. That, and the fact that our lens is so easy to make, should encourage other researchers to explore its possibilities."

The new work was performed in collaboration with researchers from the Maryland NanoCentre at the University of Maryland, College Park; Syracuse University; and the University of British Columbia, Kelowna, Canada.

More details of this work has been published in the paper, "All-angle negative refraction and active flat lensing of ultraviolet light," by T. Xu et al in Nature, 497, 470–474, published online on May 23rd, 2013. DOI:10.1038/nature12158

AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.



Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
Live Event