Info
Info
News Article

New GaN Centre To Drive Devices To Market

Germany-based researchers and industry players join forces to commercialise GaN-on-GaN research. Compound Semiconductor finds out more.






Thanks to a weighty €1.6 million in funds from the German Saxony State government, Dresden Technical University spin-off, NaMLab, and GaN substrate developer, Freiberg Compound Materials, have just launched a GaN research laboratory.


Drawing on this and additional funds from the German research ministry, the Gallium Nitride Centre researchers will now collaborate with colleagues at the Freiberg University of Mining and Technology to drive GaN-on-GaN optoelectronics and power electronics to commercial markets.


"We don't claim that we're going to compete on cost with GaN-on-silicon," says Professor Thomas Mikolajick, scientific director at NaMLab. "But we want to go into performance corners and special applications where you really need a low defect density."


NaMLab is known for its strong device development while keeping a close eye on commercial applications. However, Mikolajick is keen to highlight how the organisation will now be working closely with Freiberg Compound Materials on materials growth.


"We're going to make high quality GaN substrates," he asserts. "We're going to start with two inch wafers to raise quality and throughput levels to commercial standards, and then we will bring costs down by moving to larger diameters."


The partners will use HVPE to grow GaN substrates, growing a thick GaN layer on a template that will later be removed leaving the boule from which to slice GaN wafers.


"I can't be specific but we are using a template as the starting process, and we are not looking at ammonothermal growth," says Mikolajick. "The challenge will be to make the GaN as thick as possible so we can get a lot of wafers."


According to Mikolajick, his team will first develop high quality GaN substrates for laser applications, but more applications will follow.


"Maybe we'll even aim for high brightness LEDs with a high current density where you cannot get the necessary reliability from substrates with many defects," he says. "But general lighting applications are not on our roadmap as we wouldn't get to market for cost reasons.".


The team is also looking to develop vertical power devices, although Mikolajick admits this is very much research in progress right now. In past projects, NaMLab has defined a front-up process flow for planar GaN Metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMTs), but as part of the Saxony GaN Research Centre will now explore new architectures.


 "Vertical GaN MOSFETs and HEMTs have been proposed in literature, and we are currently thinking of integrating a HEMT into a vertical configuration," he says. "This is also on our roadmap, but is still a vision."


 Silicon origins


Still, vision or not, the new GaN Centre is hardly starting from scratch. NaMLab was originally set up as a joint venture between TUD and Infineon Technologies memory products, later to become memory giant Qimonda, Germany.


NaMLab's first years were spent focusing on developing high-k dielectrics for capacitors in dynamic random access memories. But then Qimonda filed for bankruptcy in 2009, and NaMLab started looking for new markets to apply its device expertise.


Come 2010, the organisation had teamed up with Freiberg Compound Materials, with a view to accelerating the development of GaN substrates by providing its industrial partner with feedback on device performance.


"Originally we were silicon guys, with our biggest knowledge being how to integrate semiconductor devices into silicon," explains Mikolajick. "We'd done a lot of work on integrating high-k dielectrics into capacitors and transistors but discovered that GaN [businesses] were also interested in integrating [these materials]."


The organisation has since worked closely with various partners on GaN HEMT processes as well as novel device development, and is now keen to swiftly turn research results into commercial applications.


Mikolajick will not be drawn on when the first real application will surface, giving several years as a ball park figure but says: "At the end of the day, if you want to sell something, you have to understand what happens after processing and make sure you can fabricate good devices. We make simple, but complete devices where you can see the entire fabrication process."


And he is confident the strong focus on device integration will bring more GaN-on-GaN devices to market.


"You know in Germany, this is not a natural way for a research organisation to work; hand in hand with product development and commercialisation," he says. "But we are working very closely with Freiberg Compound Materials, and this is an important part of founding our research centre in Freiberg."




AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.

REGISTER FOR FREE

VIEW SESSIONS

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification}
Live Event