News Article

What's The Best Business Model For Nanowire LEDs?

Should developers of nanowire LEDs seek success with devices sporting diminished droop? Or should they try undercutting the cost of incumbent chips?


There are two well-trodden paths for winning market share: Make your product better than what is out there, or make it cheaper.

Both options are on the table for developers of nanowire LEDs, which are devices that are based on the growth of long, cylindrical structures from out of the plane of a substrate. The novel architecture of this device could aid the growth of indium-rich, high-quality active regions, making it easier to fabricate green-emitting LEDs; and the design can allow a trimming of the current density through the structure, leading to a reduction in droop, which is the decline in efficiency as the current through the chip is cranked up. Alternatively, nanowire LEDs could lead to plummeting production costs, if the design can slash the amount of epitaxial material required to make a device.

Today, nanowire LEDs are in their infancy, so it is not yet clear whether they can displace the traditional planar LED through superior performance, lower cost, or a combination of the two. Evaluating the potential for superior performance forms part of the activities of European projects involving one of the world's leading chipmakers, Osram, while French start-up Aledia is pursuing the opportunity for driving down device costs.

CEO of Aledia, Giorgio Anania, is convinced that by slashing chip costs, his brand of nanowire LED can compete with its conventional cousin in all markets, and can ultimately play a massive role in what will become the biggest market of all for this device, solid-state lighting. "There are seven billion people, most of them need [LED lighting to be] cheaper "“ they can't pay $20 a light bulb."

To drive down costs "“ it is claimed that Aledia's LEDs have the potential to be produced for just a quarter of that of incumbents "“ the company is pursuing a radically different design. But to understand why it is revolutionary, one must first understand what the more common approach is.

"What everyone except us has done is to start from a good crystal substrate, mask it and open holes," explains Aledia. Nanowire LEDs are then constructed by growing up from the holes a cylindrical structure that is subsequently wrapped in a series of epitaxial layers. "The trouble there is that you've got this
buffer, typically a GaN buffer. You now have the whole cost of the two-dimensional LED."

Nanowire LEDs and their variants have a markedly different architecture from conventional, planar devices. Osram is core-shell microrod LEDs, which are larger than their nanowire cousins, and open up the opportunity to pack phosphor between the light emitting structures.

The radical route of Aledia is to dispense with the buffer. This approach is clearly more risky, but if it comes off, the company not only saves money by eliminating the buffer, but also benefits from far greater freedom over the choice of the substrate. Large area silicon is currently the preferred choice, due to its low cost and the availability of sophisticated, highly capable processing equipment for this type of wafer.

Merits of the silicon foundation extend beyond low cost manufacturing. Constructing LEDs on this foundation will also help to usher in an era of smart lighting, which could be underpinned with chips featuring three-dimensional stacking technologies.

"This is a well-known technology for the semiconductor world, but one which you can only do if you are on large-area silicon, because that is where the machines and technologies are developed," explains Anania. "We happen to be the only company on the planet in that position today."

Aledia's foundations

Aledia's nanowire LEDs originated in the labs of scientists at the research institute CEA-Leti. Two of the founders "“ COO Xavier Hugon and CTO Philippe Gilet "“ came from there, with Anania coming on board when the pair tried to raise investment to form a company to commercialise the device.

"They were going to be going out looking for money, but if you haven't done that before, you are lucky if you get one million," recollects Anania. The venture capitalists that were interested in backing a nanowire start-up wanted Anania to run the company, due to his success at Bookham, and he had to decide whether after leading a company of several thousand employees, he wanted to turn his hand to this. He weighed up the pros and cons, and decided to take on the challenge, reasoning: "It is high risk, it is a big technical bet, but if it works it is huge."

Since its founding in 2011, Aledia has come a long way. "When I look back at where the technology was when we did the spin out, I'm shocked that we were so foolhardy," admits Anania. "I look at the pictures now. They were wires, but you wouldn't think they were wires "“ they looked like bits of stones on a dirty floor." 

An example of nanowires fabricated by Osram and its partners. Side-view of microrods (blue) on a GaN template (grey) embedded in a micrograin phosphor and silicone matrix (yellow).

Progress has been underpinned by â‚¬12 million of funding, which has enabled an increase in the workforce "“ there are now around 50 people working for the company, including some who are contracted from CEA-Leti. With development of nanowire LEDs accelerating and performance improving, 58 patents have been filed to detail and protect the innovation.

The advances that have been made have not been easy to come by, partly because worldwide efforts on this class of LED are few and far between, so it is not possible to derive much benefit from the breakthroughs of others. What's more, the growth and characterisation
of nanowires is far more challenging than that of their planar cousins. "In 3D it's horrendously difficult. So many things cannot be measured "“ they need to be measured indirectly," explains Anania.

Angled scanning electron image of microrods produced by Osram and its partners. The microrods have a height of 40 mm at a diameter of ~900 nm and feature side facets that form a surface 15 times larger than that of the substrate they are standing on.

A sense of scale

Development of the company's products takes place on 8-inch wafers. This is significantly more costly than using far smaller wafers, but the key benefit is that it removes the need to scale up the process for production. "I don't believe the guys who say that they are on 2-inch, and when they get it to work, they'll move it up to 8-inch," remarks Anania, arguing that processes always need to be changed when introducing larger wafers. 

After the company has fully mastered its growth of nanowire LEDs, it will carry out this manufacturing step in-house. Wafers will then be shipped to foundries for processing, before the chips are sent on to high-volume packaging houses. "These are not partners, these are sub-contractors," asserts Anania, adding that the final products will be LEDs and modules.

Anania is rather reluctant to discuss the possible performance of Aledia's first generation products, which might be shipped in small quantities for customer evaluation in 2015. However, he is convinced that the performance of his company's devices will steadily close the gap with their conventional cousins, rather than forever playing catch-up.

The basis for this argument is that the incumbents have hit a plateau. "The leaders have made the hero samples at 200 lumens per watt, but there is no encore possible," says Anania, pointing out that although many of the Chinese LED chipmakers are well off the pace today, they will catch up to create a commodity market. Price is then the major differentiator, playing into the hands of Aledia.

It is not clear what sector of the LED market will generate the first significant revenues for the French start-up. Anania sees opportunities in outdoor displays, where the brightness of nanowire LEDs will be a major asset, and he thinks they could also have a role to play in the automotive industry. Another opportunity is in screens, which are currently dominated by LED-backlit liquid-crystal displays. Here, Anania predicts that nanotechnology will take over, because this is inherently superior for forming pixels: "Each LED is an emitter, and you've got no edge effects."

The ultimate application is solid-state lighting. Anania believes that the company will ultimately crack this market, because the efficacy of its nanowire LEDs can climb to hundreds of lumens per Watt. Thanks to growth of material on the m-plane, these devices are not plagued by the internal electric fields that hamper the output of their conventional cousins, so they should be able to outperform them.

Different planes

In part of the project SMASH "“ smart nanostructured semiconductors for energy-saving light solutions "“ scientists evaluated the merits of nanowire LEDs in more detail. Martin Strassburg, a partner in the project who works for Osram Opto Semiconductors, told Compound Semiconductor that the internal quantum efficiency for nanowires is typically 65 percent, compared to 85 percent for conventional c-plane LEDs.

This shortfall is a major impediment to a high output power: The lack of an internal electric field within the device means that there is a relatively small difference in wavelength between absorption and emission, allowing reabsorption to contribute to losses from the active region. In order to form devices with a high external quantum efficiency, internal quantum efficiency must reach the realms of 80 percent.

One advantage of the "˜core-shell' nanowire LED, according to Strassburg, is that it can suffer from far less droop than its conventional cousins: "Due to the increase in active area, we can reduce the effective current density by a factor of ten. You are then able to operate the blue LED at its maximum internal quantum efficiency." With green LEDs, droop is more pronounced, so this type of nanowire can only operate nearer its maximum, but this still leads to a substantial increase in light output at reasonable drive currents.

An array of core-shell microrods emitting blue light under resonant excitation with an ultraviolet light source. The bright spot in the centre is an artifact due to blooming effects.

Those working in the SMASH project hoped that nanowires could trim defect densities in LEDs, thanks to strain relief. Although this happened in some areas of the device, next to them were regions with higher defect densities. "We ended up more or less abandoning this part of development, because the grain sizes were much smaller than the chip size would be. But it was good to know that this was a dead end, and should not be pursued further," reflects Strassburg.

Researchers in the SMASH project also explored the development of quantum disc nanowire LEDs, which have the layers of the structure separated vertically along the protruding wire. Such a structure could, in theory, be formed by growing a conventional LED and then etching away material from the top to form wires. Obviously, however, it is better to employ a "˜bottom-up' approach: This cuts material costs and can lead to longer-wavelength devices, because more indium can be incorporated into the active region without impairing crystal quality.

Encouragingly, the internal quantum efficiency of MBE-grown, green-emitting nanowires sporting this disc architecture exceeds that of their planar cousins. However, these results cannot be replicated when this class of nanowire is grown by MOCVD, the preferred technology for high-volume LED manufacture. Due to this issue, Osram is not currently pursuing this disc-in-a-nanowire architecture.

One area where Osram is active is in the development of LEDs that share some hallmarks of the nanowire devices, but are a bit bigger. Referred to as microrod LEDs, these structures are 10-20 mm high, have a diameter of around 1 mm, and are spaced apart by between 2 mm and 5 mm.

With this geometry, it is possible to pack a phosphor between the LEDs. "The phosphor has a grain size of about ten to thirty microns, but if you put it in a mill and reduce the diameter, you can have it so small that you can fit it in between the space of the nanorods."     

Single core-shell microrod lying on its side and emitting blue light under resonant excitation with an ultraviolet light source. Because of wave-guiding effects, the ends appear brighter that the side facets.

Placing the phosphor up against the microrods leads to a hike in performance, according to Strassburg, who explains that m-plane emission is easily extracted to the side facets, where it cannot be re-absorbed, but goes directly into the phosphor. Here the light is converted and cannot be reabsorbed by the microrods, thus trimming the losses associated with the LED. What's more, thanks to being closer to the chip, the phosphor temperature is probably about 20 °C lower than if it were remote, enabling the LED to operate at a higher efficiency for more hours.

Although these microrod LEDs may feature a completely different active area morphology, incorporated in a package, they would look just like today's products. "That's why these nanowires, in combination with a phosphors, are a mid-term replacement "“ unless there is some fundamental limitation of the internal quantum efficiency."

Osram is looking at this, partly through a project entitled GECCO that involves partners from Germany, Spain, Poland and the UK. As they make progress, and Aledia refines its nanowire LEDs for commercial launch, it will be interesting to see if reports of nanowire LED development appear from other leading chipmakers âˆ' and further ahead, what emerges as the best business model for the nanowire LED.

-Compound Semiconductor contacted LED nanowire developer Glo during the preparation of this article. Glo declined the opportunity to be interviewed.

AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.



Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
Live Event