News Article

Using Graphene To Tune THz Lasers

Manchester team shows potential for using carrier doping to tune programmable QCL lasers

Subhasish Chakraborty and colleagues at the University of Manchester have combined an atomically thin graphene sheet with terahertz quantum cascade lasers (QCL) to make a terahertz laser that can be tuned via the carrier doping level of the graphene layer.

According to the researchers, who published the research in Science, this is the first time live control over the output spectrum of QCLs has been demonstrated. They say the demonstration opens up the possibility of reversible control over the laser emission through the integration of graphene waveguides.

The output of a QCL (a stack of quantum wells grown in this case out of GaAlAs/GaAs by MBE) has a spectrum of wavelengths that can be controlled by depositing a gold film patterned with slots at regular intervals to encourage some output frequencies and discourage others.

The slots create surface plasmons, which modify local electric fields and the modes within the cavity, rather like small antennas on top of the laser cavity.

The Manchester researchers have been working an aperiodic holographic form of grating, developed using a computer algorithm to generate slot spacings that will most effectively deliver a desired output spectrum.

The Manchester team built two similar lasers, one with a gold grating and one a mono-layer of graphene covering the gold slots but separated from the gold by a polymer insulator.

While gold has fixed conductivity and fixed surface plasmon properties, graphene's Fermi energy and carrier concentration can be changed by electrical biasing to adjust conductivity and surface plasmon properties.

The gold holographic grating encourages an output spectrum extending from 2.88 to 3.0THz with four peaks at 30GHz intervals. These emerge along with a sea of largely suppressed sidebands.

Compared with the reference laser, biasing the graphene at the same voltage as the gold on the modified laser makes the sidebands far worse - in effect, partially turning the slots off. Set with the graphene biased 1V positive with respect to the gold, the sidebands are suppressed far more than with plain slotted gold, and so they are working as super-slots.

The researchers believe the full potential of the technique will be realised when technologists find ways to deposit individual graphene control gates over individual slots. With algorithms that can turn spectral requirements into slot patterns, plus the ability to turn slots on and off at will, single THz lasers can be designed for more than one application, or to generate more than one spectrum in a single application.

Demonstration of the integrated graphene plasmon laser principle lays the foundation for a new generation of active, programmable plasmonic metamaterials with major implications across photonics, material sciences, and nanotechnology.

Terahertz photonic devices remain a strong sector worldwide and the field is now moving into applications areas in medicine, security and terabit/sec data communication and the research work from Dr Chakraborty's group is ideally placed to take advantage of this trend.

'Gain modulation by graphene plasmons in aperiodic lattice lasers' by S. Chakraborty et al; Science 15 Jan 2016: Vol. 351, Issue 6270 

AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.



Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
Live Event