Colloidal QD laser diodes just around the corner
Los Alamos scientists demonstrate quantum dot LED that also operates as an optically pumped laser
Los Alamos scientists have incorporated meticulously engineered colloidal quantum dots into a new type of light emitting diodes (LEDs) containing an integrated optical resonator, which allows them to function as lasers. These novel, dual-function devices clear the path towards versatile, manufacturing-friendly laser diodes. The technology can potentially revolutionise numerous fields from photonics and optoelectronics to chemical sensing and medical diagnostics.
"This latest breakthrough along with other recent advances in quantum dot chemistry and device engineering that we have achieved suggest that laser diodes assembled from solution may soon become a reality," said Victor Klimov, head of the quantum dot group at Los Alamos National Laboratory. "Quantum dot displays and television sets are already available as commercial products. The colloidal quantum dot lasers seem to be next in line."
Colloidal quantum dot lasers can be manufactured using cheaper, simpler methods than modern semiconductor laser diodes that require sophisticated, vacuum-based, layer-by-layer deposition techniques. Solution-processable lasers can be produced in less-challenging lab and factory conditions, and could lead to devices that would benefit a number of emerging fields including integrated photonic circuits, optical circuitry, lab-on-a-chip platforms, and wearable devices.
For the past two decades, the Los Alamos quantum dot team has been working on fundamental and applied aspects of lasing devices based on semiconductor nanocrystals prepared via colloidal chemistry. These particles, also known as colloidal quantum dots, can be easily processed from their native solution environment to create various optical, electronic, and optoelectronic devices. Furthermore, they can be 'size-tuned' for lasing applications to produce colours not accessible with existing semiconductor laser diodes.
In a paper published in Nature Communications, the Los Alamos researchers successfully resolved several challenges on the path to commercially viable colloidal quantum dot technology. In particular they demonstrated an operational LED, which also functioned as an optically-pumped, low-threshold laser. To achieve these behaviors, they incorporated an optical resonator directly into the LED architecture without obstructing charge-carrier flows into the quantum dot emitting layer.
Further, by carefully designing the structure of their multilayered device, they could achieve good confinement of the emitted light within the ultrathin quantum dot medium on the order of 50 nanometers across. This is key to obtaining the lasing effect and, at the same time, allowing for efficient excitation of the quantum dots by the electrical current. The final ingredient of this successful demonstration was unique, home-made quantum dots perfected for lasing applications per recipes developed by the Los Alamos team over the years of research into the chemistry and physics of these nanostructures.
Presently, the Los Alamos scientists are tackling the remaining challenge, which is boosting the current density to levels sufficient for obtaining so-called 'population inversion' -- the regime when the quantum dot active medium turns into a light amplifier.
'Optically Pumped Colloidal-Quantum-Dot Lasing in LED-Like Devices with an Integrated Optical Cavity' by Jeongkyun Roh et al; Nature Communications volume 11, Article number: 271 (2020)
