Loading...
News Article

CoolSiC for ultra-fast pit stops ...

News

Ingeteam and Infineon team up on superfast EV charging

Spain based power conversion group Ingeteam and Infineon have teamed up for best customer experience in superfast electric vehicle (EV) charging. Rated at 400 kW, the converter INGEREV RAPID ST400 from Ingeteam is based on CoolSiC MOSFETs in an EasyDUAL 2B housing. A single charging point implements eight of Infineon’s FF6MR12W1M1_B11 modules. Depending on the charging capabilities of the respective car, an EV now only needs to stop for a minimum of 10 minutes for an 80 percent percent battery charge. This is comparable to refueling a conventional car with internal combustion engine.

The design of the INGEREV RAPID ST400 converter has proven to operate successfully at real life conditions. Already last year, the first project integrating this technology was developed, implemented, and commissioned by IBIL, the leading recharge technology services company in Spain, for Repsol, the multienergy provider and leading spanish petrol station operator.

Located at Ugaldebieta in the Bay of Biscay region, it was commissioned in October 2019 as a lighthouse project in the field of electro mobility. The facility on the heavily frequented A-8 motorway features four ultra-fast charging points. These units guarantee optimal distribution of the available power between the four vehicles that can be connected simultaneously. More importantly, the technology is flawless and operates without any major downturns since the start.

“SiC enables high switching speeds with lower switching losses. This results in shorter charging times and charging stations that are about one-third smaller, since considerably fewer components are required for cooling," said Peter Wawer, president of Infineon’s Industrial Power Control division. “With its physical properties, SiC can make an important contribution to electric mobility. As various consumer studies show, the acceptance of electro mobility very much depends on the availability of an efficient fast-charging infrastructure. We have proven that we can provide the underlying technology.”

SiC MOSFETs: Understanding the benefits of plasma nitridation
Wolfspeed reports Q2 results
VueReal secures $40.5m to scale MicroSolid printing
Mitsubishi joins Horizon Europe's FLAGCHIP project
Vishay launches new high voltage SiC diodes
UK team leads diamond-FET breakthrough
GaN adoption at tipping point, says Infineon
BluGlass files tuneable GaN laser patents
QD company Quantum Science expands into new facility
Innoscience files lawsuit against Infineon
Riber revenues up 5% to €41.2m
Forvia Hella to use CoolSiC for next generation charging
Photon Design to exhibit QD simulation tool
Ortel transfers CW laser fabrication to Canada
Luminus adds red and blue multi-mode Lasers
PseudolithIC raises $6M for heterogeneous chiplet tech
Mesa sidewall design improves HV DUV LEDs
IQE revenue to exceed expectations
'Game-changing' VCSEL system targets clinical imaging
German start-up secures finance for SiC processing tech
Macom signs preliminaries for CHIPS Act funding
IQE and Quintessent partner on QD lasers for AI
EU funds perovskite tandems for fuel-free space propulsion
EU to invest €3m in GeSi quantum project
Transforming the current density of AlN Schottky barrier diodes
Turbocharging the GaN MOSFET with a HfO₂ gate
Wolfspeed launches Gen 4 SiC MOSFET technology
Report predicts high growth for UK's North East
Element Six unveils Cu-diamond composite
SemiQ launches hi-rel 1700V SiC MOSFETs
Lynred to exhibit Eyesential SWIR sensor for machine vision
Thorlabs buys VCSEL firm Praevium Research
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: