Loading...
News Article

Lockheed Martin and Ayar Labs Partner on optical I/O

News

Companies to develop new generation of defence platforms with optical I/O

Lockheed Martin and Ayar Labs have entered into a collaboration to develop future sensory platforms that use Ayar Labs’ optical I/O microchips to transfer data faster, at a lower latency, and at a fraction of the power of existing electrical I/O solutions.

The new platforms could be used across Department of Defense (DoD) applications to capture, digitise, transport, and process spectral information.

“As the complexity and amount of data grows on the battlefield, faster decision-making is essential. New innovative system architectures, coupled with AI and machine learning techniques, are needed for our customers’ mission success,” said Steve Walker, chief technology officer and vice president, Engineering & Technology at Lockheed Martin. “Ayar Labs’ optical interconnect solution provides the necessary technology to process spectral information with greater speed and lower latency for next-generation system designs.”

Lockheed Martin is partnering with Ayar Labs in developing multi-chip package (MCP) solutions which place high-density, high-efficiency optical I/O chiplets in the same microelectronics package as the radio frequency processing devices. The development and integration of Ayar Labs’ TeraPHY optical I/O chiplets and SuperNova light source represent a faster, more efficient, and more reliable transfer of data throughout the platform. This is important for next-generation architectures that will use phased array apertures to connect systems and people to make smarter, faster decisions.

“Our advances in interconnect density, latency, reach and power efficiency represent a significant advantage for extreme-edge sensing applications, which is critical for enabling next-generation architectures and systems,” said Charles Wuischpard, CEO of Ayar Labs. “For example, our optical I/O solution will provide a 5x power reduction and 12x size reduction versus a representative mid-board optical solution.”

Lockheed Martin and Ayar Labs's co-authored paper ‘Converged RF Phased Arrays enabled by Silicon Photonics’ was presented at the IEEE International Symposium on Phased Array Systems and Technology earlier this month.

QD company Quantum Science expands into new facility
Innoscience files lawsuit against Infineon
Riber revenues up 5% to €41.2m
Forvia Hella to use CoolSiC for next generation charging
Photon Design to exhibit QD simulation tool
Ortel transfers CW laser fabrication to Canada
Luminus adds red and blue multi-mode Lasers
PseudolithIC raises $6M for heterogeneous chiplet tech
Mesa sidewall design improves HV DUV LEDs
IQE revenue to exceed expectations
'Game-changing' VCSEL system targets clinical imaging
German start-up secures finance for SiC processing tech
Macom signs preliminaries for CHIPS Act funding
IQE and Quintessent partner on QD lasers for AI
EU funds perovskite tandems for fuel-free space propulsion
EU to invest €3m in GeSi quantum project
Transforming the current density of AlN Schottky barrier diodes
Turbocharging the GaN MOSFET with a HfO₂ gate
Wolfspeed launches Gen 4 SiC MOSFET technology
Report predicts high growth for UK's North East
Element Six unveils Cu-diamond composite
SemiQ launches hi-rel 1700V SiC MOSFETs
Lynred to exhibit Eyesential SWIR sensor for machine vision
Thorlabs buys VCSEL firm Praevium Research
Advancing tuneable InP lasers on a heterogeneous platform
P-GaN gate HEMTs have record threshold voltage
Guerrilla RF releases GaN power amplifier dice
Narrow-linewidth DFB lasers now at 405 and 488nm
Researchers develop tech for future fast-charging stations
Vermont GaN Tech Hub awarded nearly $24M
Onsemi completes buy-out of Qorvo SiC JFET business
Quantum Science announces Innovate UK funding
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: