+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
News Article

NREL reveals novel gallium oxide module

News

Power module sources its power completely wirelessly making it compatible with a wider range of electric vehicles

Some careers are sparked by dreams of greatness; others by a desire for achievement or prestige. But for Faisal Khan, chief researcher of power electronics at the US National Renewable Energy Laboratory (NREL), pursuing a career in renewable energy was personal.

Khan grew up in Dhaka, the capital of Bangladesh and one of the most densely populated cities in the world. At the same time that his family battled air pollution from cars and two-stroke motorbikes, he also saw them struggle with power blackouts from the country’s failing electrical grid.

The power quality became so bad that, in 10th grade, Khan, along with several members of his local science club, taught themselves to build UPS—Uninterruptible Power Supplies—so their families would have backup power during blackouts.

Now as chief researcher of power electronics at the only US national laboratory focused on renewable energy: the Department of Energy's NREL, Khan is leading a transformational project at the laboratory to focused on the ultrawide-bandgap material called gallium oxide.

The project spans three different NREL research centres: the centre for Integrated Mobility Sciences, of which Khan is a part; the Materials Science centre; and the Power Systems Engineering centre. The team’s goal is to make NREL a one-stop shop capable of fabricating a new gallium oxide power module with built-in intelligence and an advanced cooling system.

The power module, Khan explained, works like a Lego block: Once dropped into an electric vehicle, like a car or even an airplane, it uses gallium oxide to convert battery voltage (in direct-current form) into the three-phase alternating current necessary to power the propulsion motor.

That is standard practice—most EVs use power modules to charge and convert battery power to run the motor and change speeds. But the NREL design is absolutely unique.

In general, power modules require a small amount of power to run, and normally, they are linked to high-voltage systems with cables or wires. Khan led the NREL team to design a power module that sources its power completely wirelessly. Because it requires no special wiring, the device is compatible with a wider range of electric vehicles.

What's more, the NREL design will be far more rugged than commercially available power modules. Thanks to the special characteristics of gallium oxide, a powerful, highly robust semiconductor material, the device will be capable of withstanding the high temperatures generated by the switching operations inside the power converter.

The team is also working to make the device 'smart': It will come with a block that can wirelessly monitor the module’s state of health and predict component failure before it occurs, helping to make EVs more reliable than ever before.

The power module Khan’s team is developing has been designed to be fabrication friendly: Khan estimates that an entire traction inverter can be built in about 30 minutes, thanks to its wireless control and monitoring systems. And each of its additional features, from thermal management to live-monitoring the system’s state of health, are meant to make the power conversion system attractive to industry adopters.

“This is an extremely exciting project, but I am always thinking of the next step,” Khan said. “The device could be used, of course, in traction applications for electric cars, in electric airplanes, and for high-power, high-voltage, industrial-scale conversion. But we are already working on scaling this power module up for even higher-voltage applications where there are very few conventional solutions.

“That,” he mused, “would really be a breakthrough. That would be something extraordinary.”

×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: