+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
News Article

Oxford Instruments to commercialise wafer-scale fabrication for 2D MoS2

Method from the UK's National Physical Laboratory enables Oxford to carry out non-destructive quality control checks

While graphene was the first 2D material to be studied in detail, there is now also a focus on others. Single-layer MoS2, a semiconducting 2D material, is generating a lot of interest due to its combination of electronic and optical properties that could pave the way for the next generation of electronics and optoelectronics devices.

In order to commercialise electronic devices made of 2D materials, industry faces a challenge to carry out quality control checks without destroying or damaging the material. As a single-layer of a 2D material is only a single atom or molecule thick, assessing their quality so far has only been possible using destructive techniques.

Defects are expected to critically impact the performance of MoS2-based electronic devices, so the ability to investigate and quantify the number of defects without causing damage is crucial for enabling large-scale manufacture of the material and device fabrication.

Oxford Instruments, a provider of high technology systems and tools for industry and research, looked to develop a new deposition system and process that could produce MoS2 in a more industrially-scalable manner to help further the commercialisation of MoS2. The team of researchers were in need of a suitable quality control approach, and turned to the research from the National Graphene Metrology Centre (NGMC), a leader in the characterisation and advanced measurement of 2D materials, at NPL.

"We were investigating the use of Raman spectroscopy for characterising MoS2 and found that it is a viable high-throughput and non-destructive technique for quantifying defects in this exciting 2D material," recalls Andrew Pollard, senior research scientist at NPL. "Importantly for this study we could controllably introduce known defects into MoS2 as a first step, using a technique from our previous work in graphene."

Due to this, says Ravi Sundaram, senior scientist at Oxford Instruments, "we were able to use NPL's industrially-focused research as a framework for developing our own quality control measure that uses Raman spectroscopy to quantify defects in MoS2 produced using chemical vapour deposition. While such techniques are widely used for graphene, there was no established way of checking the quality of MoS2 in a non-destructive manner before NPL's work was published. Being able to measure the quality of the material enables us to optimise the growth process. This ensures we are able to provide very high quality, low defect density MoS2 films from our tools."

NPL's work on MoS2 provided Oxford Instruments with the methodology they needed to develop their own quality control process, which characterises the 2D MoS2 layers without having a destructive impact on the material's structure. This enables the team to efficiently characterise the MoS2 produced via an industrially scalable technology, helping to accelerate the commercialisation of 2D materials."We have both academic and industry customers, who are looking for efficient production and characterisation of these novel materials," says Ravi.

"MoS2 is a promising material for electronics, and quite a few industries are interested in it. Being able to manufacture it efficiently is vital to making the material commercially viable and attractive, and this technique has helped us offer a high quality and competitive product to our customers."

MoS2's inherently thin atomic structure not only offers several advantages in scaling down traditional electronics but also opens up the possibility of adding further functional elements on a chip for applications such as sensors. In addition, its semiconducting electronic structure renders it very interesting for optical applications such as photovoltaics and light emission. As such, upscaling the production of MoS2 and assessing its quality using non-destructive approaches offers vast benefits not only to manufacturers, but also to the industry as a whole.

Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: