Info
Info
News Article

Tiny Quantum Dots Boost Charge Transfer In Solar Cells

A single-particle study identifies a possible path to improved conversion of sunlight to electricity in photovoltaic devices and LEDs
Quantum dots - tiny semiconductor crystals with diameters measured in billionths of a metre - have enormous potential for applications that make use of their ability to absorb or emit light and/or electric charges.


Examples include more vividly coloured LEDs, photovoltaic solar cells, nanoscale transistors, and biosensors. But because these applications have differing and sometimes opposite requirements, finding ways to control the dots’ optical and electronic properties is crucial to their success.


In a recent study in the journal Chemical Communications, scientists at the U.S. Department of Energy’s Brookhaven National Laboratory, Stony Brook University, and Syracuse University show that shrinking the core of a quantum dot can enhance the ability of a surrounding polymer to extract electric charges generated in the dot by the absorption of light.


“Photovoltaic cells made of quantum dots paired with plastic materials like conductive polymers are far easier to make and less expensive than conventional silicon-based solar cells," says Mircea Cotlet, a physical chemist at Brookhaven’s Centre for Functional Nanomaterials (CFN), who led the research team. “These kinds of materials are inexpensive, easy to synthesise, and their assembly would be relatively easy."





Two light-absorbing quantum dots (orange/red spheres) surrounded by a conducting polymer ("stick-and-ball" structure). Shrinking the core of the quantum dot enhances the transfer of electric charges called "holes" (h+) from the quantum dot to the polymer. Quantum dots with enhanced charge transfer could find application in photovoltaic solar cells


The researchers say that the downside is that, right now, solar devices based on silicon can’t be beaten in terms of efficiency. Perhaps as the cost of silicon cells is less and because of the advanced tehnology. But with the developments in III-V based multijunction cells, CdTe and CIGS cells, this is a bone of contention.


And research aimed at understanding the photovoltaic process at the nanoscale could change that.


“The ability to make and study single particles at the CFN allows us to observe and test properties that would be blurred, or averaged out, in larger samples," says Huidong Zang, a postdoctoral research fellow working with Cotlet and first author on the paper.


In a solar cell, the ideal material would absorb a lot of light and efficiently convert that energy into electric charges that can be easily extracted as a current.


To study the details of this process, the scientists used quantum dots composed of a light-absorbing CdSe core encased in a protective ZnS shell and surrounded by a conductive polymer. They tested the ability of the polymer to extract electric charges generated when the quantum dots absorbed light, and conducted experiments using quantum dots with cores of different sizes.


“We knew from theoretical predictions that particle size should have an effect on the charge transfer with the polymer, but no one had done this as an experiment until now, and in particular at the single-particle level," Cotlet says.


When they varied the size of the quantum dot’s core, the scientists found that the smaller the diameter, the more efficient and more consistent the charge transfer process.


“By using a smaller core, we increased the efficiency of the charge transfer process and narrowed the distribution of the charge-transfer rate so it was closer to the ideal with less variability," Zang comments.


The scientists were exploring a particular type of charge transfer created by the movement of holes. In electronic devices, holes can be channelled just like electrons to create electric current. And in this case extracting holes had an added benefit - it increased the time that quantum dots, which turn on and off in a blinking pattern, remained in the 'on' condition.


“Hole transfer inhibits blinking," Cotlet explains. “It keeps the quantum dot optically active longer, which is better for the photovoltaic process, because charges can only be extracted when the quantum dot is on."


“It would be impossible to see this effect with bulk samples because you can’t see the ‘on’ and ‘off’ states. When lots of quantum dots are mixed together, the signals average out. You can only see it by looking at the single nanoparticles."





CFN's Mircea Cotlet (standing), post-doc Huidong Zang (center), and Prahlad Kumar Routh, a graduate student in the Materials Science Department at Stony Brook University, hope their research on quantum dots for solar cells will brighten our energy future. The scientists are wearing laser safety goggles required for their experiments


Cotlet’s group had previously conducted a similar study pairing quantum dots with carbon-rich buckyballs. In that study, they found the opposite effect: Buckyballs decreased the dots “on" time while enhancing the transfer of electrons.


In other applications combing dots and polymers, such as LEDs or biosensors, scientists are looking for ways to suppress charge transfer as this process becomes detrimental.


“Knowing these fundamentals and how to control these processes at the nanoscale should help us optimise the use of quantum dots for a wide range of applications," Cotlet concludes.


More detail of this work has been published in the paper, "Core size dependent hole transfer from a photoexcited CdSe/ZnS quantum dot to a conductive polymer," by Huidong Zang et al in Chem. Commun., 2014. DOI: 10.1039/C3CC47975G.


This research was funded by the DOE Office of Science and by the Air Force Office of Scientific Research.





AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.

REGISTER FOR FREE

VIEW SESSIONS

Info
×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
{taasPodcastNotification}
Live Event