Osram launches lower profile LED for iris scanning
Osram Opto Semiconductors has announced a new infrared LED SFH 4786S infrare (IRED) designed to make iris recognition systems less complex and with lower profiles. At 1.6mm this new IRED is around one third shallower than its predecessor. Its direction of emission is slightly angled so there is no further need for the usual mechanical aids to ensure correct geometrical alignment.
In 2014 the company launched the Oslux SFH 4780S, the first IRED which enabled iris scanners to be integrated in mobile devices. Whereas the 2.4 mm high SFH 4780S is optimised for maximum light extraction, the height of the SFH 4786S has been reduced to 1.6 mm to cover demand for extremely low-profile emitters in designs where very little height is available.
A completely new feature is the 8° tilt in the emission direction of the SFH 4786S. The slightly sideways emission characteristic is beneficial for the field of view of the camera mounted a little distance away. The performance of the overall system is significantly better than one with an emitter emitting vertically upwards. Up to now, mechanical means have therefore been used in iris scanners to tilt the IRED slightly. "This additional expense is no longer needed with the SFH 4786S", said Bianka Schnabel, marketing manager at Osram Opto Semiconductors.
"For our customers this greatly reduces the level of complexity in designing iris scanners." The application also benefits from the somewhat broader emission angle of +-13° which allows a larger area to be illuminated at the customary working distance for iris scanners in mobile devices. The radiant intensity of the SFH 4786S is typically 1,750mW per steradiant (mW/sr) at a current of 1A.
Like the SFH 4780S, the SFH 4786S emits light with a wavelength of 810nm. In this spectral range it is possible to achieve high-contrast images for all iris colours.
The chips are of nanostack design in order to provide two emission centers per emitter and therefore maximum optical output. Both IREDs are based on the Oslux package which focuses the light tightly with its reflector and an appropriate internal lens. Compared to the SFH 4780S, the only difference designers have to take into consideration is the smaller component height of the SFH 4786S; the footprint remains the same.
The SFH 4786S is already available on request for first customer projects. Volume start-up is planned for the end of January 2016.
