Loading...
News Article

Record efficiency for heat pump power electronics

News

Fraunhofer team achieves 99.74 percent efficiency in GaN-based converter optimised for electrocaloric heat pumps

Researchers in the Fraunhofer project 'Electrocaloric heat pumps' (ElKaWe) are working on new types of heat pumps that do not require compressors and are expected to achieve higher efficiencies in the future.

Today's heat pumps achieve only about 50 percent of the physical Carnot limit, while the electrocaloric heat pump can theoretically achieve 85 percent. But how efficient electrocaloric heat pumps ultimately are also depends to a large extent on the efficiency of the integrated power electronics.

In the ElKaWe project, the Fraunhofer Institute for Applied Solid State Physics IAF is in charge of developing the drive electronics for electrocaloric heat pumps, and researching devices based GaN.

For the first time, the researchers have now developed and optimised power electronics specifically for electrocalorics. They have succeeded in implementing an ultra-efficient circuit topology for voltage converters based on GaN transistors, achieving an electrical efficiency of 99.74 percent in the electrical power path. The GaN-based multilevel DC/DC converter sets global standards and far exceeds the previous state of research of less than 90 percent conversion efficiency for electrical control of these novel heat pumps.

More efficient electronics provide more efficient heat pumps

The significant increase in efficiency of the drive electronics has a direct effect on the coefficient of performance of the entire system. Until now, electrocaloric heat pump systems were limited by the losses of the electronics, among other things. The increased electrical efficiency leads directly to a higher coefficient of performance of the entire heat pump system and is thus a milestone on the way to more efficient heat pumps.

“Our ultra-efficient power electronics make it realistic for the first time to achieve well over 50 percent of the maximum theoretical coefficient of performance with electrocaloric heat pumps, even at the system level. There is still a lot of research to be done, but in future this technology could become a more efficient and completely emission-free solution for heating and cooling,” says Stefan Mönch, researcher in the field of power electronics at Fraunhofer IAF.

“Essential for realising a high coefficient of performance of electrocaloric heat pumps is a very high efficiency in materials, electronics and heat transfer. If you get all this under control, electrocalorics has enormous potential,” adds Kilian Bartholomé, project manager of ElKaWe and researcher at the Fraunhofer Institute for Physical Measurement Techniques IPM.

The results have already been published partially in the IEEE Journal of Emerging and Selected Topics in Power Electronics:

The electrocaloric effect

The principle behind the electrocaloric heat pump is the electrocaloric effect: If an electrical voltage is applied to an electrocaloric material made of special ceramics or polymers, the material heats up. As soon as the voltage is removed, the material cools down again, and the entire process is almost completely reversible. Since the electrocaloric materials form an electrical capacitance, the power electronics in the system has the task of electrically charging and discharging the electrocaloric capacitances several times per second as highly efficiently and thus as loss-free as possible, with heat being pumped in each cycle.

Fraunhofer lighthouse project ElKaWe

The results were obtained as part of the Fraunhofer lighthouse project ElKaWe. In this project, researchers from six Fraunhofer Institutes are investigating electrocaloric heat pumps for heating and cooling. Led by Fraunhofer IPM, they are developing electrocaloric heat pumps that enable particularly efficient heat dissipation, and do not require compressor technology and refrigerants. The goal of the project work is to demonstrate the potential of the technologies for future efficient and emission-free heating and cooling applications.

×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: