+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Loading...
News Article

Novel solar cell technology handles the blues

A new technology enables the capture of high-energy photons more efficiently in CIS solar cells
Getting the blues is rarely a desirable experience - unless you’re a solar cell, that is.

Scientists have together developed a new, inexpensive material that has the potential to capture and convert solar energy - particularly from the bluer part of the spectrum - much more efficiently than ever before.

The researchers are from the U.S. Department of Energy’s Argonne National Laboratory and the University of Texas at Austin.



Most simple solar cells handle the bluish hues of the electromagnetic spectrum inefficiently. This is because blue photons - incoming particles of light that strike the solar cell - actually have excess energy that a conventional solar cell can’t capture

“Photons of different energies kick electrons up by different amounts,” says Brian Korgel, a professor at the University of Texas. “Some photons come in with more energy than the cell is optimised to handle, and so a lot of that energy is lost as heat.”

Because of this limitation, scientists had originally believed that simple solar cells would never be able to convert more than about 34 percent of incoming solar radiation to electricity.

However, about a decade ago, researchers saw the potential for a single high-energy photon to stimulate multiple 'excitons' (pairs of an electron and a positively-charged partner called a 'hole') instead of just one. “This was a very exciting discovery, but we were still sceptical that we could get the electrons out of the material,” Korgel says.

In their study, Korgel and his team used specialised spectroscopic equipment at Argonne’s Centre for Nanoscale Materials to look at multi-exciton generation in copper indium selenide (CIS), a material closely related to another more commonly produced thin film that holds the record for the most efficient thin-film semiconductor."

This is one of the first studies done of multiple exciton generation in such a familiar and inexpensive material,” notes Argonne nanoscientist Richard Schaller. “Argonne’s spectroscopic techniques played a critical role in the detection of the multi-excitons,”

Korgel notes. “These kinds of measurements can’t be made many places.”

In order to deposit thin films of the nanocrystalline material, the researchers used a process known as 'photonic curing', which involves the split-second heating up and cooling down of the top layer of the material. This curing process not only prevents the melting of the glass that contains the nanocrystals, but also vaporises organic molecules that inhibit multiple exciton extraction. 

Although the study mostly proves that the efficiency boost provided by multiple exciton extraction is possible in mass-producible materials, the major hurdle will be to incorporate these materials into actual real-world devices.

“The holy grail of our research is not necessarily to boost efficiencies as high as they can theoretically go, but rather to combine increases in efficiency to the kind of large-scale roll-to-roll printing or processing technologies that will help us drive down costs,” Korgel explains.

A paper based on the study appeared in the paper, Journal of Physical Chemistry Letters. The study was supported by grants from the Department of Energy’s Office of Science and the National Science Foundation.

×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: