Loading...
News Article

Marktech Introduces PIN diode UV-Enhancement Process

News
For high sensitivity, low noise and long-term stability against UV and gamma radiation

Marktech Optoelectronics, a manufacturer of standard and custom optoelectronics components and assemblies, including UV, visible, near-infrared (NIR), and short wavelength infrared (SWIR) emitters, detectors, InP epiwafers and other materials, has announced the introduction of its Series 4 UV-enhancement process for PIN photodiodes.

The new Series 4 process allows for the optimisation of Marktech PIN photodiodes for accurate, effective measurements in both the UV and blue-green spectral ranges, or @365 nm (0.22 A/W), as well as over a wavelength range of 300 nm to 1100 nm. The process further allows the Series 4 to offer high sensitivity, low noise, low dark current, low capacitance and long-term stability against UV and Gamma radiation exposures.

Standard Series 4 UV-enhanced PIN photodiodes from Marktech are available with customer choice of either a TO-46 (3-pin) or TO-5 (2-pin and 3-pin) metal can package. Small-to-medium sized quantities are typically available with 24-hour shipment from stock via Marktech's longtime distribution partner, Digi-Key Corporation.

Beyond standard product, Series 4 UV-enhanced PIN photodiodes are offered with a full range of supporting LED emitter accessories, including UV, visible, and NIR types. The Marktech LED emitters can be supplied along with Series 4 PIN photodiodes as either two separate components; or, combined into a single, seamlessly integrated package, such as a reflective switch. Most custom and hybrid designs from Marktech are available in as few as 6-8 weeks from prototype approvals and may be produced in virtually any-sized quantity, from prototype to OEM volumes.

The Series 4 process allows Marktech PIN photodiodes to be specified within virtually any application where high-sensitivity, low-noise performance and long-term stability against UV and Gamma radiation levels are required. Typical applications include, though are not limited to, colour meters, currency authentication, photometry, spectroscopy equipment, analytical systems, and fluorescence. All Series 4 UV-enhanced PIN photodiodes are designed, developed, and manufactured in the USA. Units are both REACH and RoHS compliant.

Double heterostructure HEMTs for handsets
AlixLabs to collaborate with Linköping University
SiC MOSFETs: Understanding the benefits of plasma nitridation
Wolfspeed reports Q2 results
VueReal secures $40.5m to scale MicroSolid printing
Mitsubishi joins Horizon Europe's FLAGCHIP project
Vishay launches new high voltage SiC diodes
UK team leads diamond-FET breakthrough
GaN adoption at tipping point, says Infineon
BluGlass files tuneable GaN laser patents
QD company Quantum Science expands into new facility
Innoscience files lawsuit against Infineon
Riber revenues up 5% to €41.2m
Forvia Hella to use CoolSiC for next generation charging
Photon Design to exhibit QD simulation tool
Ortel transfers CW laser fabrication to Canada
Luminus adds red and blue multi-mode Lasers
PseudolithIC raises $6M for heterogeneous chiplet tech
Mesa sidewall design improves HV DUV LEDs
IQE revenue to exceed expectations
'Game-changing' VCSEL system targets clinical imaging
German start-up secures finance for SiC processing tech
Macom signs preliminaries for CHIPS Act funding
IQE and Quintessent partner on QD lasers for AI
EU funds perovskite tandems for fuel-free space propulsion
EU to invest €3m in GeSi quantum project
Transforming the current density of AlN Schottky barrier diodes
Turbocharging the GaN MOSFET with a HfO₂ gate
Wolfspeed launches Gen 4 SiC MOSFET technology
Report predicts high growth for UK's North East
Element Six unveils Cu-diamond composite
SemiQ launches hi-rel 1700V SiC MOSFETs
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: