+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
Technical Insight

Charge Pumps Drive Battery-Powered Devices

Regulated charge pump solutions are very popular for applications in handheld devices where the total output current is less than 100 mA, due to their simplicity and low cost, writes Fabien Franc of Catalyst Semiconductor.

White LEDs are widely used today in handheld devices, such as cellular phones, as backlights for color liquid-crystal display (LCD) screens or to light up keypads. Colored LEDs, notably blue and green, are also used for such purposes and in addition are good indicators for reporting to the user an incoming call or a charging battery.

LED brightness is proportional to the amount of current flowing through the device. Also, the voltage must be high enough to turn the device on. The most popular batteries today are lithium-ion based, where the voltage is typically around 3.6 V but drops as the battery discharges. For these reasons, LEDs cannot be powered directly from the battery, and a regulated boost converter is needed. Regulated charge pump solutions are very popular especially in applications where the total output current is less than 100 mA, due to their simplicity and low cost. LED brightness is proportional to the amount of current flowing through the device. Also, the voltage must be high enough to turn the device on. The most popular batteries today are lithium-ion based, where the voltage is typically around 3.6 V but drops as the battery discharges. For these reasons, LEDs cannot be powered directly from the battery, and a regulated boost converter is needed. Regulated charge pump solutions are very popular especially in applications where the total output current is less than 100 mA, due to their simplicity and low cost. LED brightness is proportional to the amount of current flowing through the device. Also, the voltage must be high enough to turn the device on. The most popular batteries today are lithium-ion based, where the voltage is typically around 3.6 V but drops as the battery discharges. For these reasons, LEDs cannot be powered directly from the battery, and a regulated boost converter is needed. Regulated charge pump solutions are very popular especially in applications where the total output current is less than 100 mA, due to their simplicity and low cost.

×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: