+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
News Article

Infineon unveils Highest Power Density and Reliability IGT modules

Compact IGBT Modules PrimePACK 3 and flag-ship EconoDUAL 3 presented at PCIM, Europe.

Infineon Technologies presents the PrimePACK module, FF1400R17IP4 with 1400A in 1700V in a PrimePACK 3 packaging, and the EconoDUAL 3 module, FF600R12ME4, with 600A in 1200V. “Introducing the two new modules in the proven PrimePACK and EconoDual families, Infineon once again underlines its technological leadership in offering IGBT modules with highest power density for energy-efficient, compact designs,” says Martin Hierholzer, VP and GM of Industrial Power at Infineon. The FF1400R17IP4 significantly widens the power range of the PrimePACK family and is suited to applications including renewable energies, and powerful industrial drives. The new IGBT module addresses the rapidly growing requirements in the market for higher power within the same compact dimensions, paired with highest reliability. With dimensions of 89mm x 250mm, the FF1400R17IP4  has an intelligent, optimized chip layout and module design. This packaging results in an improved distribution and dissipation of heat, reduced thermal transfer resistance between base plate and heatsink, and minimal internal leakage inductance. The FF600R12ME4 is ideal for use in applications such as frequency converters in automation drive systems, central inverters in photovoltaic systems. The optimized module design with regard to interconnection technology and thermal resistance, results in high current utilization and a consequently high efficiency. The power range may be increased by up to 30% compared to the other EconoDUAL modules but package dimensions remain the same. In addition to the familiar soldered version of the control contacts, the highly reliable PressFIT contact technology has been introduced in the EconoDUAL 3 family. Samples of the IGBT module FF1400R17IP4 of the PrimePACK 3 family will be available from Q3 2010, while start of volume production is planned for the Q4f 2010. Samples of the EconoDUAL 3 module FF600R12ME4 are also available, with series production planned for September 2010.

×
Search the news archive

To close this popup you can press escape or click the close icon.
×
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • 1st January 1970
  • View all news 22645 more articles
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: