+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
 
News Article

Teseq's GaAs IC PA is reliable and consistent

The new gallium arsenide power amplifier is designed for demanding testing environments making it ideal for automotive, military and aerospace BCI EMC testing.

 

Teseq, a developer and provider of instrumentation and systems for Electromagnetic Compatibility (EMC) emission and immunity testing, has expanded its broadband amplifier line.

The new Class A model operates from 10 kHz to 400 MHz with a saturated power level of 110 W.  

The CBA 400M-110 uses GaAs integrated circuit technology to provide markedly better compression characteristics and increased efficiency than comparable silicon-based power amplifiers.  




The new power amplifier is designed for demanding EMC testing environments with non-ideal load conditions due to mismatch caused by the coupling device or equipment under test (EUT) in the antenna's path, making it ideal for automotive, military and aerospace BCI EMC testing.  It offers the same high reliability and excellent performance as other models in Teseq's extensive amplifier line.

 

The GaAs amplifier circuit's Class A push pull design ensures linear performance with high reliability and low distortion across the 10 kHz to 400 MHz operating range as well as continued operation at full power even when an open or short circuit is present.

For high efficiency, the CBA 400M-110 is powered from a switched mode power supply giving the amplifier a high power factor and a wide voltage operating range.  Integral fans cool the unit and an excess temperature sensor prevents faulty cooling.  A remote control option is available for this unit.

A safety interlock connector is provided, should standby mode be needed.  This feature can be activated by a short circuit to ground.  In addition, integrated front panel indicators reveal over-temperature and RF interlock conditions.

Harmonics are better than -20 dBc at 80 W output.  Operating temperature ranges from 00 C to 400 C (320 F to 1040 F).

Pricing for the CBA 400M-110 starts at $17,000 and lead time is 12 - 16 weeks ARO.

 

×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: