Loading...
News Article

OLEDs take 50% smartphone market share

News

But penetration rate in TVs, laptops, and tablets under 3 percent, says TrendForce

TrendForce’s latest report on OLED technology says that OLED panels will secure more than 50 percent market share in the smartphone industry by 2023, thanks to a continuous decrease in costs.

However, the OLED penetration rate in other applications like TV, laptop, and tablets is under 3 percent. To boost the market penetration of OLEDs, panel manufacturers must tackle more demanding technical challenges, including improved specifications and the need for effective cost reductions to meet market expectations, says TrendForce.

The report highlights the introduction of eLEAP technology by Japan Display Inc. (JDI). For the first time, this technology employs a maskless technique, achieving lower power consumption, higher brightness, and an extended lifespan. Two primary obstacles in high-generation OLED development—RGB evaporation interference and uneven film thickness caused by gravity-induced sag of the Fine Metal Mask (FMM) as it enlarges—are addressed by eLEAP. By resolving these issues, eLEAP bolsters the development of higher-generation panels and increases production efficiency via mass production.

In parallel developments, Visionox exhibited its maskless ViP technology at the Society for Information Display’s annual Display Week. The company has successfully reduced the gap between pixels by combining the lithographic isolation of pixels with advanced evaporation technology. Furthermore, when the resolution reaches 800 PPI, the distance between the pixel layers is reduced to 10µm, which increases the opening rate by 31.9 percent, effectively enhancing the lifespan of the OLED. However, challenges include the need to produce guide pillars for isolation, using line-source evaporation to control the evaporation angle, connecting the cathode and isolation pillars to reduce electrode impedance (auxiliary electrode), and managing yield loss from repeated processes.

TrendForce has identified five advantages that Visionox's ViP technology has for isolating OLED pixels. First, the manufacturing process can address the colour mixing yield issues caused by long-term FMM evaporation. Second, individual pixel electrodes can not only increase overall lifespan but also mitigate losses from leakage currents. Third, pixel density and brightness can be effectively elevated. Fourth, the concurrent production of auxiliary electrodes could facilitate larger OLED applications in the future. Lastly, the technology can overcome the limitations FMM imposes on pixel spacing, thus broadening its applications and aiding future high-generation development.

Recently, several key industry players have announced ambitious plans. Samsung declared an investment plan for its new G8.7 fab, BOE is planning its B16 project, JDI and HKC formed a strategic alliance for new technologies, and Visionox has an aggressive push into OLED technology and its market sectors. These developments are responding not only to Apple's demand for medium-sized applications but also opening up new opportunities for OLED panels in other application markets. By 2025, it is anticipated that with the completion of new high-generation facilities, continued technology development, and lifespan improvement of materials, the market penetration rate of OLED products will be significantly bolstered.

Currently, China’s AMOLED production capacity accounts for 43.7 percent of the global market, slightly less than the capacity share held by South Korean panel manufacturers. This capacity is divided among 4 to 5 Chinese panel factories. As the current AMOLED capacity is oversupplied and it’s expected that future production capacity will only continue to grow, companies focusing exclusively on OLED production will likely continue to grapple with financial pressures.

TrendForce says it remains to be seen whether these Chinese companies will adopt a similar collaboration model to JDI and HKC given their varying technical capabilities. Through the development of new technologies and strategic alliances or integrations, they will aim to enhance their overall international competitiveness—a development worth watching over the next three to five years.

QD company Quantum Science expands into new facility
Innoscience files lawsuit against Infineon
Riber revenues up 5% to €41.2m
Forvia Hella to use CoolSiC for next generation charging
Photon Design to exhibit QD simulation tool
Ortel transfers CW laser fabrication to Canada
Luminus adds red and blue multi-mode Lasers
PseudolithIC raises $6M for heterogeneous chiplet tech
Mesa sidewall design improves HV DUV LEDs
IQE revenue to exceed expectations
'Game-changing' VCSEL system targets clinical imaging
German start-up secures finance for SiC processing tech
Macom signs preliminaries for CHIPS Act funding
IQE and Quintessent partner on QD lasers for AI
EU funds perovskite tandems for fuel-free space propulsion
EU to invest €3m in GeSi quantum project
Transforming the current density of AlN Schottky barrier diodes
Turbocharging the GaN MOSFET with a HfO₂ gate
Wolfspeed launches Gen 4 SiC MOSFET technology
Report predicts high growth for UK's North East
Element Six unveils Cu-diamond composite
SemiQ launches hi-rel 1700V SiC MOSFETs
Lynred to exhibit Eyesential SWIR sensor for machine vision
Thorlabs buys VCSEL firm Praevium Research
Advancing tuneable InP lasers on a heterogeneous platform
P-GaN gate HEMTs have record threshold voltage
Guerrilla RF releases GaN power amplifier dice
Narrow-linewidth DFB lasers now at 405 and 488nm
Researchers develop tech for future fast-charging stations
Vermont GaN Tech Hub awarded nearly $24M
Onsemi completes buy-out of Qorvo SiC JFET business
Quantum Science announces Innovate UK funding
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: