+44 (0)24 7671 8970
More publications     •     Advertise with us     •     Contact us
News Article

GaN HEMT incorporated in the first ever single-chip transceiver

The 10 GHz gallium nitride device reduces chip footprint by over 90%, enabling more compact radars and wireless communications equipment

Fujitsu Laboratories has announced that it has successfully developed the world's first single-chip transceiver using GaN high electron mobility transistor (HEMT) technology that features an output of 6.3 W and that operates at a frequency of 10 GHz. In order to simultaneously handle strong transmission signals and weak incoming signals in the same chip, you need to efficiently switch between outgoing and incoming signals, while reducing the impact that outgoing signals have on incoming signals. However, until now, it has been difficult to accomplish both of these objectives in tandem. Fujitsu Labs has resolved this issue by developing a duplexer with low signal loss using a GaN-HEMT, and through high-output circuit integration design technology that controls signal interference between the outgoing and incoming signals. The result is a transceiver chip with a footprint that is less than 10% of the size of the multiple chips that have been needed until now. With this technology, it is now possible to configure a high-output transceiver using just one chip, enabling systems such as radar equipment and wireless communications equipment to be made more compact. Details of this technology were presented at the IEEE MTT International Microwave Symposium (IMS 2012) held in Montreal which started on June 17th. GaN is used as a material in blue LEDs. Compared to the conventional semiconductor materials of silicon and GaAs, GaN features a high electron transfer rate and a relatively high breakdown voltage. Given these characteristics, GaN HEMTs, or field-effect transistors that use GaN, show promise for high-output, exceptionally efficient operations. They are ideally suited to a wide range of core technologies for IT applications, including satellite transceivers, mobile phones, GPS-based navigations systems, and broadband wireless networking systems.


In line with the advancement of a network-based society, radio wave demand in a variety of wireless systems is expected to increase even further. For example, aircraft radar uses the 10 GHz frequency band, which is able to measure the distance and direction of physical objects with high precision. Existing radars are configured with separate equipment for transmitters and receivers. A transceiver chip that integrates both function, would allow more compact systems. Figure 1: Typical uses of the 10-GHz band

Technical Issues

The transceiver chips necessary to make radar and other equipment more compact must deliver high-capacity communications and high output in order to cover a large area. Transmitting high-power signals using the same chip that receives low-power signals requires high-efficiency switching in the outbound signal and reduced impact of outbound signals on inbound signals. Achieving both of these goals has been a problem.

Newly Developed Technology

Now, Fujitsu Labs has what it says is the world's first single, compact transceiver chip that uses GaN-HEMT and operates in the 10-GHz band. Its key features are as follows:

1. Ultra-compact transmit/receive switch

A new duplexer was developed that uses GaN-HEMT (Figure 2, right). Measuring a compact 1.8 mm × 2.4 mm, with 1.1 dB transmission loss in the 0–12 GHz range. This is far smaller and lighter than earlier switches using magnetic materials (Figure 2, left), less than 10% the size. Figure 2: Comparison of conventional transmit/receive switches and the newly developed one

2. High-output circuit integration design technology

Via holes for grounding are arrayed around the transistors, shielding against the release of unwanted signals. What's more, the locations and layouts of signal wiring and circuitry were optimised using three-dimensional analysis of electromagnetic radiation to suppress unwanted signal interference (Figure 3). This technology ensures stable operation, preventing the oscillations of high-power circuitry from causing malfunctions. Figure 3: Technologies to suppress unwanted signal interference These technologies were integrated into a single prototype chip that combines a duplexer, a transmitting amplifier, and a receiving amplifier (Figure 4). The chip operates at 6.3 W in the 10-GHz band and measures 3.6 × 3.3 mm, less than one-tenth the size of earlier multi-chip systems. Figure 4: Photo and diagram of the newly developed GaN transceiver chip The result shows that these technologies make it possible to design a high-output transceiver around a single chip, with applications in radar and broadband communications, promising smaller, lighter systems. In the future, Fujitsu Labs intends for this technology to be put to use in a wide range of applications that require compact modules with high output, including wireless communications and radar systems.

Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in: