News Article

Record-breaking Antireflection Coating On Solar Cells

A new development could significantly improve the performance of solar cells, LEDs and photodetectors
A team of researchers from Rensselaer Polytechnic Institute (RPI), Magnolia Solar, Inc. and Pohang University of Science and Technology have demonstrated a novel antireflection (AR) coating.

It beats the widely employed double-layer AR (DLAR) coating on state-of-the-art triple-junction solar cells.

The scientists demonstrated that the solar cells investigated gain over 4 percent in efficiency when replacing the industry-standard DLAR with an optimised four-layer AR coating.

Considering that the solar spectrum is an intrinsically broadband spectrum, such broadband characteristics of the AR coating are undoubtedly beneficial for high power conversion efficiency.

What's more, omnidirectional AR characteristics have become important for the rapidly expanding terrestrial application of solar cells. This is because solar irradiance in terrestrial applications usually has a large range of incident angles for non-tracking solar cells.

Both broadband and omnidirectional AR characteristics are attainable by four-layer AR coatings, as demonstrated by the RPI-led team.

RPI says that the excellent broadband and omnidirectional AR characteristics of the four-layer AR coating are achieved through solving the problem of refractive index matching at multiple layer interfaces.

By using tailored and low-refractive index nanoporous silica layers, the team has greatly reduced the refractive index contrast at the semiconductor / AR coating / air interfaces.

Through a multilayer design methodology powered by a genetic algorithm optimisation, favourable antireflective properties over a specified wavelength range and angle-of-incidence range were found.

Two porous layers of the four-layer AR coating were fabricated by oblique-angle deposition of silica thereby resulting in films with refractive indices of 1.32 and 1.11. This is less than the refractive index of silica. The other two layers are dense and were fabricated by co-deposition of silica / titania using sputtering.

According to the photocurrent measurements performed by the team, the angle-of-incidence (0°- 80°) averaged photocurrent enhancement (over an uncoated triple-junction solar cell) of the four-layer AR coating amounts to 34.4 percent. The enhancement of a DLAR coating is only 25.3 percent.

In the future, the team members Jaehee Cho and E. Fred Schubert, will integrate this novel AR coating technology on surface-textured devices.

They will also investigate innovative fabrication methods for depositing low-refractive index AR coatings on curved surfaces, such as a hemispherical lens.

Further details of this research are described in the paper, “Enhanced Omnidirectional Photovoltaic Performance of Solar Cells Using Multiple-Discrete-Layer Tailored - and Low-Refractive Index Anti-Reflection Coatings," by X. Yan et al in Advanced Functional Materials, 23, 583 (2013).

AngelTech Live III: Join us on 12 April 2021!

AngelTech Live III will be broadcast on 12 April 2021, 10am BST, rebroadcast on 14 April (10am CTT) and 16 April (10am PST) and will feature online versions of the market-leading physical events: CS International and PIC International PLUS a brand new Silicon Semiconductor International Track!

Thanks to the great diversity of the semiconductor industry, we are always chasing new markets and developing a range of exciting technologies.

2021 is no different. Over the last few months interest in deep-UV LEDs has rocketed, due to its capability to disinfect and sanitise areas and combat Covid-19. We shall consider a roadmap for this device, along with technologies for boosting its output.

We shall also look at microLEDs, a display with many wonderful attributes, identifying processes for handling the mass transfer of tiny emitters that hold the key to commercialisation of this technology.

We shall also discuss electrification of transportation, underpinned by wide bandgap power electronics and supported by blue lasers that are ideal for processing copper.

Additional areas we will cover include the development of GaN ICs, to improve the reach of power electronics; the great strides that have been made with gallium oxide; and a look at new materials, such as cubic GaN and AlScN.

Having attracted 1500 delegates over the last 2 online summits, the 3rd event promises to be even bigger and better – with 3 interactive sessions over 1 day and will once again prove to be a key event across the semiconductor and photonic integrated circuits calendar.

So make sure you sign up today and discover the latest cutting edge developments across the compound semiconductor and integrated photonics value chain.



Search the news archive

To close this popup you can press escape or click the close icon.
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.

Please subscribe me to:


You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
Live Event