Loading...
News Article

Custom MMIC to show latest products at EuMW

New DC-18 GHz switches and MMIC amplifiers to 36 GHz on display in London 3rd to 7th October

Custom MMIC will be showing its latest MMIC switches and amplifiers at European Microwave Week (EuMW) in London this October from the 3rd-7th with UK representative, Aspen Electronics.

Products include two new GaAs MMIC switches -  the non-reflective CMD234C4 and CMD235C4 - for high military and instrumentation applications. 

The CMD234C4 is a DC-18 GHz broadband MMIC SP3T switch featuring a low insertion loss of 2.4 dB and a high isolation of 40dB at 10 GHz. The CMD235C4 is a DC-18 GHz broadband MMIC SP5T switch offering broadband performance with an insertion loss of 2.5dB and high port-to-port isolation of 40dB at 10 GHz. Both switches provide a switching speed of 66ns and an input P1dB of 21 dBm. 

It will also be showing two ultra wideband performance distributed GaAs MMIC amplifiers; the DC to 22 GHz CMD240 and 2 to 22GHz CMD241.

The CMD240 has a noise figure down to 2.2 dB and a gain of 15 dB. The CMD240 demonstrates a 1 dB compression point of 19 dBm at 10 GHz and an output IP3 of 28 dBm with 80 mA supply current. With slightly less current draw and a gain of 13.5 dB from 2 to 22 GHz, the CMD241 has a noise figure of 2.3 dB. The CMD241 features enhanced output power performance with an output P1dB of 21 dBm.

Both the CMD240 and CMD241 are matched to 50 ohms, and the CMD241 includes on-chip DC block capacitors.

Also at the show will be a 26-35 GHz balanced driver amplifier, the CMD243, which offers 15.5 dB of gain. The CMD243 also provides an output P1dB of 21 dBm, a low noise figure of 4.4 dB and is 50 ohm matched. The CMD243 is suitable for communications, military, and space applications.

SPONSOR MESSAGE

Secure Your Hydrogen Supply

A study supply of high-purity hydrogen is critical to semiconductor fabrication. Supply chain interruptions are challenging manufacturers, leading to production slowdowns and stoppages. On-site hydrogen generation offers a scalable alternative for new and existing fabs, freeing the operator from dependence on delivered gas.

Plant managers understand the critical role that hydrogen plays in semiconductor fabrication. That important job includes crystal growth, carrier gas, wafer annealing, and in the emerging Extreme UV Lithography (EUV) that will enable new generations of devices. As the vast need for semiconductors grows across all sectors of world economies, so does the need for high-purity hydrogen.

Take control with Nel on-site hydrogen generation.

Read more
Ascent wins order for power beaming Space PV module
Navitas Partners with Great Wall for 400V-DC power
SemiQ supplies SiC MOSFET modules for EV battery cell cyclers
Coherent and Keysight collaborate on 200G/lane multimode VCSEL tech
Lumentum and Marvell exhibit integrated 450G optical interface
Marktech announces new MWIR LEDS
Imec identifies stable range for GaN MISHEMTs in RF PAs
Polar Light completes $3.4m funding round
Lynred launches advanced thermal imaging modules
Altum RF expands Sydney design centre
Sivers announces partnership with O-Net
Ayar Labs unveils first UCIe optical chiplet
Aixtron delivers InP tool to Nokia
WHU-USTC team demo novel temperature monitoring of GaN device
Phlux lands £9m to take InGaAs sensors to next level
4-inch gallium oxide facility established in Swansea
Mazda and Rohm collaborate on automotive GaN
University of South Carolina chooses MOCVD tool from TNSC
Wolfspeed appoints new CEO amidst funding crisis
SiC slowdown is only short term, says Yole
Pragmatic launches flexible IGZO-based NFC chip
Poet ships latest optical engine samples
EU project to develop 1200V DC powertrain
£250m to turbocharge Welsh compound semi cluster
Scientists harness phonon-polariton electroluminescence
TU Graz team reveals the secrets of heat conduction
Aixtron to partner in ‘GraFunkL‘ UVC project
EU collaboration steps up heterogeneous design
Diodes Inc announces InSb sensors
Far-UVC module targets close-quarters disinfection
Sivers and WIN collaborate on DFB laser production
Boosting the blocking voltage of birectional HEMTs
×
Search the news archive

To close this popup you can press escape or click the close icon.
Logo
x
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
x
Adblocker Detected
Please consider unblocking adverts on this website