< Page >

Features


Wednesday 1st July 2009
AmberWave Systems has a novel technique for creating high-quality films of germanium and III-Vs on silicon – aspect ratio trapping. This involves epitaxial growth into trenches in a SiO2 layer and promises faster computer processors, say James Fiorenza, Mark Carroll and Anthony Lochtefeld.
Wednesday 1st July 2009
When metal electrodes are placed on the top of an LED, they reduce its emission area and increase internal absorption. But both of these problems can be completely eradicated with a buried n-type contact, say Osram Opto Semiconductors’ Berthold Hahn, Karl Engl and Markus Klein.
Wednesday 1st July 2009
One option for relieving the ever increasing strain on optical networks is to move to far higher bit rates. A European effort called HECTO has adopted that stance and developed 100 Gbit/s Ethernet transmitter chips based on InP, says project leader Urban Westergreen.
Wednesday 1st July 2009
Ian Ferguson and co-workers at Georgia Institute of Technology have produced crackfree GaN-on-silicon LEDs that feature an Al2O3 interlayer and produce similar internal quantum efficiencies to controls grown on sapphire.
Wednesday 1st July 2009
InP MOSFETs with a HfO2 gate dielectric can deliver higher drive current, higher transconductance and a lower gate leakage if they contain a silicon passivation layer, according to researchers at the University of Texas at Austin.
Monday 15th June 2009
The NASDAQ stock exchange has lost 40% of its value in the last 12 months, and the shares of most III-V players have fared worse. Well chosen acquisitions and manufacturing efficiency separate the winners and losers, finds Andy Extance.
Info
Monday 15th June 2009
As recent as 2002, China imported all of its LED chips. It is now meeting half of this demand with domestic production and making the transition from incandescents to solid-state lighting. Richard Stevenson catches up with progress.
Monday 15th June 2009
Typically based on III-V solar cells, concentrated photovoltaics has the potential to be a fantastic source of renewable energy. But in a world where private finance has all but disappeared, Michael Hatcher wonders whether this fledgling industry has a future.
Monday 15th June 2009
Conventional LEDs that are used for solid-state lighting have to be connected to an AC-to-DC converter. But this bulky power supply impacts efficiency and reliability, and can be discarded by turning to Epistar's AC-LEDs that feature on-chip rectification circuits, says Carson Hsieh.
Monday 8th June 2009
Phone-charging shoes? Wireless light switches? Photovoltaics that harness the warmth of radioactive isotopes? Energy harvesting is starting to gain momentum, finds Jon Cartwright.
Monday 1st June 2009
Photonic quasicrystals and a droop-combating layer can create efficient LEDs with well-directed emission for navigational, taxi and landing lights in aircraft, and backlighting cockpit displays. Duncan Allsopp and Philip Shields describe the progress made under the UK's "Novelels" project.
Tuesday 26th May 2009
Radar's latest challenge is to uncover details of objects at vast distances. Vacuum tubes and silicon electronics are not up to the task, but Microsemi's SiC static induction transistors can aid this quest by delivering long, powerful pulses at a high duty cycle, says Mike Mallinger.
Info
Monday 18th May 2009
Military and emergency services are looking for very-wide-bandwidth radios with exceptional reliability, minimal weight and low cost. One component that can help to meet these needs is Nitronex's GaN HEMT power amplifier, claim Pradeep Rajagopal and Ray Crampton.

1111High-power Laser Diodes Serve Many Tasks. These Include Cutting Metals, Welding Plastics And Solders, And Pumping Solid-state Lasers, Fiber Lasers And Amplifiers, Which Can All Be Accomplished With Single Emitters, Bars And Arrays.

Many Applications Prefer To Employ A Circular Beam Emitted From The End Of A Fiber, Rather Than The More Complex Emission Profile That Comes From An Edge-emitting Laser. However, The Costs Of Fiber-coupled Laser Diode Manufacturing Are High – Almost An Order Of Magnitude More Than Those For Laser Diode Chips And Bars, In Terms Of Dollars Per Watt.

The Increased Cost Of The Fiber-based Laser Stems From The Inferior Beam Quality Of Edge-emitting Broad-area Diode Lasers And Bars. Expensive Beam-formatting Optics With Tight Tolerances Are Needed To Transform The Output From These Emitters Into A Form That Can Be Coupled Into A Fiber, And This Propels The Dollar-per-watt Figure To A Level That Is Unattractive For Many Applications. But The Packaging Costs Can Be Driven Down With Bright Diodes Built With Low-cost Manufacturing Techniques That Produce An Output That Is Easy To Couple Into A Fiber. At Alfalight, Which Is Based In Madison, WI, We Have Developed A Design That Does This – A Curved-grating Surface-emitting Distributed Feedback (SE-DFB) Laser (figure 1).

One Way To Generate A High-power Source Is To Couple The Emission From Several Single-mode Lasers Into A Single Fiber. But This Approach Is Impractical Because Each Diode Produces No More Than 1 W Of Useful Power, And An Unwieldy Number Of Lasers Would Have To Be Coupled Together For Power-hungry Industrial Applications. So Numerous 100 µm Wide, Multimode Broad-stripe Lasers In Bar And Stack Forms Are Used Instead, Which Can Deliver The Hundreds To Thousands Of Watts Needed For Pumping Applications.

By Utilizing A Relatively Simple Coupling Scheme, About 10 W Of Power Can Be Launched Into A 100 µm Diameter, 0.15 Numerical Aperture Fiber. However, Power Scaling Is A Significant Challenge. Combining Chips Boosts Power, But At The Expense Of Higher Costs And Increased Complexity. Multiple Bars Offer An Alternative Route To Power Scaling, But They Require Expensive Micro-optics For Collimation And Complex, High-tolerance Configurations For Beam Transformation. Once Again, Costs Are An Issue.

A Far Better Source For Fiber Coupling Is Our SE-DFB Laser, A Novel Emitter With A Curved Grating That Is Analogous To An Unstable Resonator. This Design Draws On A Well Known Approach To Establishing Good Lateral-beam Quality Over A Large Area, And Enables Fabrication Of High-power, High-brightness Lasers That Can Form An Ideal Source For Power Scaling, Particularly In The Form Of Arrays.

Our SE-DFB Lasers Have Several Advantages Over Their Edge-emitting Cousins: The Absence Of Facet Coatings; Greater Tolerances For Bonding To A Heat Sink; Better Array Yields; And Simplified Coupling Optics. These Four Strengths Create A Laser With Lower Manufacturing Costs Than An Edge-emitter, Whether It Is In The Form Of A Single Chip Or An Array.

Edge-emitters Require A Facet Coating, Which Is A Time-consuming, Cumbersome Step. SE-DFB Production Avoids This. It Employs A Wafer-level Batch Process To Add An Anti-reflection Coating To The Device's Output Window. Out-of-spec Dies Can Then Be Discarded With Wafer Mapping Techniques, Leading To Minimal Yield Losses At Expensive Downstream Steps.

The SE-DFB Design Also Simplifies Bonding Of The Chip To A Heat Sink. Edge-emitters Have To Be Precisely Placed At The Knife-edge Of An Expensive Heat Sink, Whereas SE-DFB Lasers Can Simply Be Picked And Placed On An Inexpensive Flat Heat-sink Surface, Using Far Higher Alignment Tolerances.

Fabricating Arrays Is More Successful With SE-DFBs Because Failure Can Be Eliminated By Selecting Burned-in, Pre-tested, Known-good Devices. In Comparison, Entire Stacks Of Edge-emitting Arrays Have To Be Scrapped After Most Of The Value-adding Has Occurred If A Handful Of Faulty Elements Are Found.

Lastly, SE-DFBs Simplify Fiber Coupling. Output Can Be Collimated Straight Out Of The Chip In One Direction, Eliminating The Need For An Expensive Diffraction-limited, Fast-axis Microlens, Which Is An Indispensable Component For Collimating Edge-emitters. Collimation Along The Perpendicular Optical Axis Can Be Realized With A Relatively Inexpensive Cylindrical Lens. In Fact, One Aspherical Lens Can Focus The Output Of A Two-dimensional Array Of SE-DFBs, Which Cuts The Cost Of Focusing Optics.

The Strengths Of The SE-DFB Laser Stem From The Curved Second-order Grating That Is Etched Into The P-cladding And Subsequently Coated With Gold (figure 1). Adding A Patterned P-contact Defines The Pumped Stripe Dimensions, And The Parts Of Grating Outside Of This Region Remain Unpumped (figure 2).

A Zero-order Mode Propagates Along The Waveguide, Which Has Two Diffraction Orders: One For Feedback And Another For Surface Emission. Feedback Only Occurs From The Grating, Thanks To Suppression Of Fresnel Reflections From The Ends And Sides Of The Chip By An Absorbing Layer Above This Structure. Surface Emission Is Produced From Transmission Through The Substrate Via An Anti-reflection-coated Window Aperture In The N-side Metallization. Laser Output Is Emitted From The Device's Top Surface, With The Beam Collimated In The Longitudinal Direction And Diverging In The Lateral Direction, With A Full Angle Of 8°.

The SE-DFB's Curved Grating Produces An Unstable Resonator With Modes That Are Governed By The Phase Of The Grating (i.e. Its Shape). This Phase-related Information Is Incorporated Into The SE-DFB Laser By Taking A Glass Plate And Encoding An Array Of Phase-height Patterns On This Surface. This Information Is Transferred To The Device With An Interference Pattern That Follows The Curved Wavefront Phase, Which Can Be Defined On A Wafer That's Coated With A Photoresist Using A Holographic Exposure System. High Volume Production Is Easy, Because A Single Exposure Can Record The Grating Pattern Over The Whole Wafer.

The Curved Grating Is Responsible For The SE-DFB's Cylindrical Wavefront In The Output Beam. This Profile Makes It Appear That The Beam Emanates From A Narrow Virtual Line Source, Even Though A Much Wider Stripe Is Pumped (figure 4). In Fact, The Ratio Of The Pump Source Width To That Of This Virtual Line Waist Is Approximately Equal To The Increase In Brightness Produced By The Curved Grating Design. This Grating Also Suppresses Filamentation In The Wavefront Propagation – A Common Issue In Broad Stripe Lasers – Which Stems From The Combination Of Spatial-hole Burning And Carrier-index Coupling.

We Have Demonstrated That The Theoretical Strengths Of The SE-DFB Design Can Be Realized In Real Devices, Such As A Single Stripe Emitter With A 7500 × 500 µm Active Area. This Chip Produces A Record Power Of 73 W From A Single Laser Diode, Thanks To The Freedom To Scale The Pumped Stripe Area While Maintaining The Current Density At A Relatively Low, Constant Value. With A Well Designed Grating It Is Possible To Suppress Filamentation And Control The Lateral Mode For A Much Larger Size Of Gain Stripe Compared With Edge-emitters.

The Emission Bandwidth Of This SE-DFB Laser Is Just 0.3 nm, Which Makes It 10 times As Bright As An Edge-emitter (figure 5). Our Chip Also Produces A Five-fold Reduction In Wavelength Shift With Temperature To 0.07 nm/°C, Removing The Need For Chip Cooling In Certain Applications. Immunity To Catastrophic Optical Mirror Damage – A Common Failure Mechanism For High-power Edge-emitters – Is Another Strength Of Our Laser That Results From The Absence Of Any Facet. Due To The Relatively Large Emission Area Of Our SE-DFBs, The Output Beam Of Our Laser At The Exit Window Is 1000 times Less Than That Of An Edge-emitter.

In Some Applications, Edge-emitters Suffer From A Back Reflection That Damages The Source. This Is Not An Issue For SE-DFBs Because Coupling Light Back Into The Cavity Would Require Precise Matching Of The Wavelength And The Incident Angle, Which Is Very Unlikely. Instead, Incident Light Is Reflected By The Chip, Preventing Damage From Parasitic Beams.

We Are Developing A Two-dimensional Tiling Of SE-DFBs To Realize Multi-kilowatt Arrays, Through The Interleaving And Polarization Combining Of Individual Sources. Further Power Scaling Should Be Possible With Wavelength Beam Combining. A Key Advantage Of The Two-dimensional Tiling Approach Is That It Allows Devices To Be "voltage-added", Which Means That They Can Be Driven With An Inexpensive Low Current Supply That Cuts The Overall System Cost.

The SE-DFB's Narrow Spectral Width And Minimal Shift In Wavelength With Temperature Make It An Ideal Source For Pumping Narrow Absorption Peaks Of Solid-state Gain Media. This Includes The 975 nm Band Of Ytterbium-doped And ErYb Co-doped Fiber Lasers, Which Has A Relatively High Absorption Coefficient. Shorter Fiber Lengths Can Then Be Employed In The Laser, Which Mitigate Deleterious Nonlinear Effects, Such As Stimulated Brillouin Scattering And Stimulated Raman Scattering. Another Benefit Of Pumping At This Wavelength Is That It Leads To A Lowering Of The Quantum Defect – The Difference In Photon Energy Between Pump Source And Emitted Light. Gain Media Can Then Run Cooler, Reducing The Likelihood Of Thermal Lensing. This Is A Significant Benefit For Solid-state Lasers, Such As Slab And Thin Disc Lasers.

It Is Impractical To Use Edge-emitting Fabry-Pérot Lasers For Pumping The 975 nm Transition Because Their Spectral Width Is Too Broad. In Addition, The Wavelength Drift With Temperature Is Too Fast And Expensive Thermal Management Systems Are Needed To Maintain The Resonance Wavelength. What's More, Increases In Pump Current That Detune The Wavelength From Resonance Produce A Substantial Amount Of Power That Is Not Absorbed, Which Has To Be Managed Without Causing Failure To Downstream Components. This Adds To The Challenge Of Building Reliable, Kilowatt-class Fiber Lasers And Amplifiers.

Our SE-DFB Laser's Desirable Characteristics, Such As Incredibly High Brightness And A Very Small Shift In Emission Wavelength With Temperature, Make Them Great Sources For Pumping Fiber-coupled Arrays That Generate Kilowatt Powers. However, They Can Also Be Employed As Direct-diode Sources For Plastic Welding, Sintering, Heat Treatment, Soldering, Engraving And Some Cutting Applications. Armed With Bulk Cylindrical Optics, Simple, Low-cost Collimation Is Possible And The SE-DFB Can Then Be Used As An Inexpensive Source For Other Applications, Such As Security Illumination, Sensing And Designation. By Operating This Laser In Pulsed Mode, It Can Produce Nanosecond Pulses That Have A Five-fold Increase In Power, Which Makes This Source A Low-cost Option For Transmitters In Range Finders. With Such A Broad Range Of Applications, It Is Clear That The SE-DFB Laser Has A Bright Future.

View Pdf Of Article

Friday 15th May 2009
11111Alfalight's top-emitting laser produces far higher output powers than edge-emitters thanks to a curved grating that runs along the underside of the chip. This radical design allows beam-focusing with simple optics and is ideal for pumping fiber lasers, say Manoj Kanskar and François Brunet.
Monday 11th May 2009
IQE's Bedwyr Humphreys argues that GaN grown on 100 mm SiC is the only commercial solution for GaN RF products, while GaN grown on silicon continues to search for a niche.
Monday 11th May 2009
Andy Extance finds that 3G integration, improved call times and 4G standards give the power amplifier community cause for optimism at the 2009 Mobile World Congress in Barcelona.
Monday 11th May 2009
As Bob Cart sailed the seas for months on end, he bemoaned the feeble output from his yacht's solar panels, and wondered how this technology could ever generate affordable electricity. Back on dry land he has designed a lightweight tracker system with parabolic mirrors, launched GreenVolts and is now leading the build of a 2 MW power plant. Richard Stevenson reports.
Monday 11th May 2009
JEDEC standards offer the assurance that high-volume electronics manufacturers are producing quality goods, but they are not all well suited to RF chips. Andy Extance learns how the GaAs industry plans to resolve its qualification issues.
Info
Monday 11th May 2009
Paying great care to impedance matching has paved the way to production of incredibly wide bandwidth amplifiers with unprecedented efficiency, say TriQuint's Mike Lincoln and Mark Andrews.
Monday 27th April 2009
Slipping a SiO2 layer into nitride-on-silicon LEDs boosts their brightness, thanks to a substantial reduction in the substrate absorption, explains a research team from Singapore and Germany.
Monday 20th April 2009
Photonic integrated circuits are notoriously difficult to make, but the combination of HVPE and MOCVD can substantially simplify the fabrication of monolithic transceivers, routers and waveform generators on an InP platform, says a multinational research team.
Tuesday 14th April 2009
Wire electrical discharge machining is a versatile, economic approach to boule processing. Its small kerf width means that it wastes substantially less material than the incumbent technology – the wire saw – and no microcracks are produced during processing, explain Dinesh Rakwal and Eberhard Bamberg from the University of Utah.
Monday 6th April 2009
Cree, Nichia and Seoul Semiconductor are among the surprising number of companies that have resolved intellectual property disputes already this year. Market analyst Jed Dorsheimer tells Andy Extance what it means for LED manufacturing.
Monday 23rd March 2009
Laser diode manufacturers are targeting the fast-growing fiber-laser market with novel technologies that deliver higher output powers and better beam quality. Richard Stevenson reports.

×
Search the news archive

To close this popup you can press escape or click the close icon.
×
Logo
×
Register - Step 1

You may choose to subscribe to the Compound Semiconductor Magazine, the Compound Semiconductor Newsletter, or both. You may also request additional information if required, before submitting your application.


Please subscribe me to:

 

You chose the industry type of "Other"

Please enter the industry that you work in:
Please enter the industry that you work in:
 
X
Info
X
Info
Live Event